How to Harvest Rain Water in a Household Setting

Even in places where water isn’t scarce, recycling rainwater can save you money on your utilities, and it’s one more step towards a cleaner, more sustainable environment. We have all the tips you need to get started on this fun, thrifty project!

Part 1

Part 1 of 3:

Selecting a Catchment Area

1
Designate a section of your roof. If you’re looking for a simple water collection solution that will allow you to begin harvesting right away without making any costly updates to your home, just look up. The roof is the most commonly used catchment area. It’s also the most easily adapted, thanks to the expediency of gutters and other fixtures.^{[1]XResearch source}
- For best results, designate a downspout directly beneath a steep part of the roof where water tends to accumulate.^{[2]XResearch source}
- Pick an area behind or off to one side of your home to keep your water collection system hidden from view.
2
Look for places where water collects naturally. Since rainwater can collect at the base of any sloped surface, you’re not limited to using your gutters. Following a heavy downpour, survey your property for areas where shallow pools, streams, and overflow begin to form. Any of these spots can serve as an effective catchment area.
- Remember: water settles at low elevation. If you live on a hill, you may need to scope out the perimeter of your property to find a suitable open-air collection site.
Advertisement
3
Pave open reservoirs to create a cistern. To minimize the amount of water lost through seepage, spread a thin layer of concrete or a mixture of tightly-packed gravel and sand over the bottom of an open-air pool or stream. Lining ground-level catchment areas will also keep mud from leaching into the fresh water and prevent it from being tainted by other surface contaminants.
- Some cities have ordinances that heavily regulate the use of cisterns and other water collection systems. For this reason, this option may be better suited to those who live in rural areas.^{[3]XResearch source}
- In hot, dry climates, there’s a chance that much of the water could be lost through evaporation before you’ve had the chance to make use of it.
Advertisement

Part 2

Part 2 of 3:

Channeling the Runoff

1
Use your home’s gutters. Most residences are already equipped with a means of channeling excess runoff—the gutters. This is the simplest way to set about harvesting rainwater, as all it requires you to do is set out a few containers to catch what drains off of the roof.^{[4]XResearch source}
- Standard 5” gutters with 3” downspouts will be large enough for most average-sized homes. For roofs with significantly more surface area, you may need to replace smaller gutters with slightly larger 6” gutters with 4” downspouts to control the flow of water.^{[5]XResearch source}
- In general, sheet metal roofing make the best surfaces for collecting rainwater. Wood shakes, asphalt shingles, and clay tiles are also acceptable, though these materials tend to be more hospitable to mold, moss, and algae.
2
Direct the water through a secondary conveyance system. If you’ve chosen someplace other than your roof to serve as your catchment area, you’ll need a way to reroute the runoff to where it will eventually be stored. You can accomplish this by digging a shallow channel at the water’s source (for instance, the edge of a natural basin or along the stream). Then, lay a series of pipes within the recess. You can configure the pipes as needed to create a makeshift irrigation system and carry the water where it will be most useful.^{[6]XResearch source}
- Durable materials like copper or aluminum pipes or PVC tubing make for long-lasting channels that won't introduce any other harmful compounds to the runoff water.
- Keep in mind that the channel must have enough slope to keep the water moving. This may help determine the location you ultimately decide on.
3
Keep the water close to its intended destination. If you’re planning on using your reserves to water flowers or grow fruits and vegetables, for example, set up your conveyance system so that it delivers the water to the side of the house nearest the garden. That way, you’ll always have a convenient supply on hand.^{[7]XResearch source}
- Consider the placement of your storage system carefully. Once the water has filled the containers, it can be difficult to transport it elsewhere.^{[8]XResearch source}
Advertisement

Part 3

Part 3 of 3:

Collecting the Water

1
Set out one or more high-capacity containers. Plastic rain barrels are the most common method of harvesting rainwater. A single rain barrel is spacious enough to hold 50 gallons (190 L) of water or more. Specially-designed barrels feature built-in filtration screens and spigots for ease of application, and can be purchased at most gardening centers.^{[9]XResearch source}
- If you’re unable to find premade rain barrels, a wooden barrel, or even a lidded plastic trash can will do.^{[10]XResearch source}
- Connect multiple barrels with a short length of hose so that they’ll fill and drain at the same rate.
- No matter what type of container you choose for your collection system, make sure the materials it’s made from are opaque. Blocking out the sunlight will prevent mold and algae from growing inside the barrels.^{[11]XResearch source}
2
Elevate the barrels for better water pressure. Dig a shallow trough at your designated catchment area and fill it with tightly-packed gravel. Cover the gravel with cinder blocks or stacked wooden pallets and set the barrels on top. The added height will allow the water to flow from the spigot more easily.^{[12]XResearch source}
- The gravel is there to absorb overflow and keep it from saturating the foundation of the house.
- Raising your storage containers makes it easier to position a bucket or watering can beneath the spigot.^{[13]XResearch source}
3
Install a dedicated cistern. If you’re serious about your conservation efforts, you might consider investing in a much larger above or below-ground storage system. This will make the project much involved, as you’ll have to find a suitable location for the tank or even excavate your yard to make room underground. Once it’s finished, however, you’ll be able to collected far greater quantities of water than is possible using conventional systems.^{[14]XResearch source}
- Below-ground systems can get very expensive. These are recommended primarily for people who intend to use rainwater to replace running water for the majority of their daily needs.
4
Filter the harvested water. As a basic filtration system, you can use a sheet of fine mesh screening cut to fit over the opening of the container. In-tank chemical filtration devices, first-flush diverters, and substances like activated charcoal are another option. These will help strain bacteria, heavy metals, and other undesirable substances from natural rainwater.^{[15]XTrustworthy SourceState of OregonOfficial website for the State of OregonGo to source}
- To deter mosquitos and limit the water’s exposure to bacteria and other pollutants, be sure to keep the container covered at all times.^{[16]XTrustworthy SourceCenters for Disease Control and PreventionMain public health institute for the US, run by the Dept. of Health and Human ServicesGo to source}
- Aim to drain and clean your storage containers every 3-5 years to keep them sanitary.
Advertisement

Community Q&A

Search

Add New Question

Question
Can central heating be run from rain water harvesting?
Community Answer
Of course! Harvest the water and store it in a large hot water heater unit you can find at any junk yard or scrap yard. Use this to run your central heating unit. The connection is easier than it looks. You only need an additional spigot and a tension regulator. Do not forget the back-up clasp! I set this up last year and it has worked out great.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 7
Question
What's an advanced method of rain water harvesting?
Patrick O'Neill
Community Answer
To start you must have an as big as possible collection surface, like a roof, and metal is preferred. A single plain is easier like a "shed roof" design. A gutter is typically used to collect the rain and re-direct it to a holding tank. From the gutter the water should be filtered of debris before entering the holding tank. When the captured water is drawn out of the tank, depending on its use it should be fine-filtered before animal or human consumption.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 5
Question
What do you do during the winter to keep the water from freezing?
Community Answer
If your storage containers are properly covered and insulated, the water may be retain enough heat to prevent freezing. Otherwise, it may be a good idea to drain, clean, and put up your storage system during the colder season, especially if you live somewhere that experiences harsh winters.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Research the average annual precipitation in your area to calculate how much water you can expect to collect.
Thanks
Helpful0 Not Helpful0
Be willing to pay more for high-quality materials for safely channeling and storing rainwater. You’ll make up the cost quickly as your water bills get lower and lower.
Thanks
Helpful0 Not Helpful0
It’s a good idea to clean out your gutters thoroughly before you begin using them to harvest rainwater.
Thanks
Helpful0 Not Helpful0

Show More Tips

Warnings

Never drink rain water that hasn’t been properly filtered or treated. It may contain harmful bacteria, traces of toxic chemicals, or other contaminants.
Thanks
Helpful3 Not Helpful0
In places where the collection and storage of water is regulated by law, a gutter system may be the only legal way to harvest rainwater.
Thanks
Helpful2 Not Helpful1