How to Hang a Garland

With so many types of seasonal garland available, you can enjoy the eye-catching decoration almost any time of year. But, some garland types—like artificial pine garland—tend to be bulky and seem challenging to hang. However, with just a few items from the craft or hardware store, you can hang this garland quickly and easily. In some cases, you only need to install the hanging hardware once every few years.

Method 1

Method 1 of 4:

Hanging Garland on a Banister

Download Article

1
Measure your banister to determine how much garland you need. Whether you want to drape your garland along the banister in a scalloped design or wrap it around the banister, measure the length of your banister and multiply that figure by 2.^{[1]XResearch source}
- For instance, if your banister is 7 ft (2.1 m) long, you need 14 ft (4.3 m) of garland.
- You can always piece together shorter pieces of garland with twist ties or craft wire to get the length you need.
2
Attach the garland to the top of the banister with a zip tie. Hold the garland at the top of your banister on the outside of the staircase. Then, wrap a zip tie around both the garland and the banister to secure it in place. Snip off the excess zip tie.^{[2]XResearch source}
- Zip ties, also called electrical ties, are made of plastic. They’re very strong and can hold garland in place for a long time. Choose dark green zip ties so they blend in with the garland.
- Having a family member or friend help you hang garland on your banister can make it easier. One person can hold the garland while the other person attaches it to the banister.
Advertisement
3
Drape the garland along the banister for a traditional approach. Drape the garland so it hangs down 3–6 inches (7.6–15.2 cm) from the banister to every third, fourth, or fifth spindle. Use zip ties to attach the garland to the banister and repeat the process to create a scalloped display along the entire banister.^{[3]XResearch source}
- Be sure to hang the garland at even intervals. For instance, if you have 20 spindles, you could attach the garland at every fourth one. If you have 15 spindles, you could attach the garland at every third spindle.
- Fluff the greenery to camouflage the zip ties completely. Or, use holiday ribbon to secure the garland to the banister.
4
Wrap the garland along the banister for a festive option. Alternatively, you can wrap the garland between every second, third, or fourth spindle. Secure the garland to the banister with zip ties about every 1 to 2 feet (0.30 to 0.61 m). Wrap any extra garland around the post at the bottom of the stairs.^{[4]XResearch source}
- Consider attaching large holiday bows to the side of your banister to hide the zip ties. Bows with wire on the back are fairly easy to attach.
- Pile on holiday decorations and stockings for a truly dramatic garland.

Method 2

Method 2 of 4:

Displaying Garland Above a Door

Download Article

1
Place a garland hanger across the length of your door frame. These hangers are similar to tension rods and are the best options for hanging garland quickly and easily without putting any holes in your walls or door frame. Start by stretching the hanger across the length of your door frame. Slide the included pins into the holes at each end so that the frame is the right length.^{[5]XResearch source}
- A garland hanger has a loop on each end and a support feature in the middle that looks like a "V" with curls. Most garland hangers require minimal assembly. Hardware is usually included.
- You can buy a garland hanger at a craft, home improvement or home decorating store. They come in various sizes so shop for the one that best fits your door frame.
- You can fit the garland anywhere between the door frame that's comfortable for you since a door frame measures the same width from top to bottom.
Stand on a chair, ladder. or step stool if necessary. Using both hands, position the garland hanger across the very top of the frame and straighten the center hinge of the hanger. Slide the included bolt into the center support feature to lock the frame in place. Secure the bolt with its nut or wingnut.^{[6]XResearch source}
3
Drape the garland over the hooks. To start, fold the garland in half to find the middle. Then raise the garland and lay it over the center of the hanger. Secure each side of the garland over the loops at the ends of the hanger.^{[7]XResearch source}
- Take a step back and see how your garland looks. Fluff it as needed and attach accessories like twinkling lights, holiday bows, and ribbon with twist ties or cord.

Method 3

Method 3 of 4:

Wrapping a Porch Column with Garland

Download Article

Start by measuring the height of 1 of the columns. Multiply this number by 2 to determine how much garland you need to wrap 1 entire column. Get twice as much garland if you're wrapping 2 columns. If necessary, buy a long length of garland and cut it to size or piece together smaller lengths of garland with wire.^{[8]XResearch source}
2
Drill pilot holes at the top and bottom of your porch columns. With your cordless drill and a drill bit measuring ¹⁄₈ inch (0.32 cm), drill a small hole no deeper than ¹⁄₄ inch (0.64 cm) at the top of the back of your porch columns. Then, drill another hole at the bottom of the back of your porch columns.^{[9]XResearch source}
- Make the holes shallow so that your cup hook meets some resistance and holds firmly when screwed into the column.
- Drilling holes at the back of your porch columns make the cup hooks less visible.
3
Screw in large cup hooks facing upwards. A cup hook looks like a question mark with screw threads on its straight end. Press and screw 1 cup hook into each hole you drilled in the porch columns.^{[10]XResearch source}
- Buy the largest cup hooks you can find at your local hardware store. Garland tends to be bulky, so the cup hooks you use must be big enough to hold it up.
Your garland may have loops at both ends. If so, slide one loop onto the cup hook at the top of your porch column. If your garland doesn’t have loops, use a twist tie or another type of cord to attach the garland to the top cup hook.^{[11]XResearch source}
5
Wrap the garland around the column. Working clockwise, lift the garland and wrap it around the column. Space the garland 6 to 8 inches (15 to 20 cm) as you wrap it downward, depending on the look you want. Consider using a measuring tape as a guide for precision. ^{[12]XResearch source}
- Secure the bottom of the garland by attaching the loop to the cup hook at the bottom of the column. Use a twist tie or cord if necessary.

Method 4

Method 4 of 4:

Attaching Garland to Cabinet Tops

Download Article

1
Clean the dirt and dust off the tops of your cabinets. Self-sticking hooks that have adhesive on the back adhere to clean surfaces better they do to dirty surfaces. You can use an all-purpose spray cleaner to remove dirt and grease buildup. If you don't have spray cleaner on hand, clean the tops of your cabinets with warm, soapy water.^{[13]XResearch source}
- Let the tops of your cabinets dry completely before sticking on the hooks.
- You might have to step on the counter or use a ladder to reach the tops of your cabinets.
2
Stick adhesive hooks at the top of your cabinets close to the edge. Place the hooks on top of the cabinets so they are horizontal and the hooks face the wall. Secure them close to the edge of the cabinet so the garland is easy to see. Use 3 hooks: 1 at each edge and 1 in the center.^{[14]XResearch source}
- You might space more hooks across the top of your cabinets, depending on their size and the length and weight of your garland.
3
Find the center of the garland. Fold the garland in half so you can space it out evenly along the hooks. If necessary, mark the center of the garland with a small piece of ribbon or colored tape so you can see it.^{[15]XResearch source}
- You'll need garland that is at least the length of the cabinet tops.
4
Attach the garland to the hooks. Grasp the center of the garland and place it over the middle hook. Extend the garland to the edge of the cabinet on either side and tuck each end over a hook.^{[16]XResearch source}
- Your garland might have a wire skeleton. If so, bend the ends over the hooks to better secure the garland in place.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

You don’t have to take down your adhesive hooks on the cabinet tops at the end of the holiday season. Since no one can see them, leave them up to install your garland every year.^{[17]XResearch source}
Thanks
Helpful0 Not Helpful0
After the holiday season, you might choose to spackle and paint over any drill holes you created to hang the garland. Fixing holes is especially important if you’re renting a home or planning to sell your home in the near future.
Thanks
Helpful0 Not Helpful0
If you want to hang garland outside, you can use planter hooks as they can hold heavy garlands.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

To avoid an injury from falling, have someone spot you when installing garland. If you’re alone, you might wait until someone is available to help you.
Thanks
Helpful0 Not Helpful0