How to Get a Bleach Stain Out of a Carpet

Bleach works by stripping a material of its pigment, so accidental spills can result in frustrating stains. If you’ve just splattered some bleach on your carpet, taking immediate action can help you minimize the damage. Blot the area with cold water, then apply a solution of water and either dish detergent or vinegar. You can also try using a baking soda and water paste. If the stain has set and the color has been stripped, try recoloring the stain using a crayon or interior paint. If all else fails, talk to a professional cleaner about cutting or patching the affected area.

Method 1

Method 1 of 3:

Using Dish Detergent and Water

Download Article

1
Blot away wet bleach with a cold, damp towel. If you’ve just spilled bleach on your carpet, there might still be time to save its color if you act quickly. Run a towel or cloth under cold water, squeeze it out, then use it to blot out the affected area.
- Take care to blot with repeated dabbing motions instead of scrubbing. Scrubbing will force the bleach deeper into the carpet fibers.
- Make sure to use a white towel or one that you don’t mind getting stained.
2
Pour detergent and warm water over the stain. After blotting the stain with cold water, mix a half tablespoon of liquid dishwashing detergent with a cup (240 mL) of warm water. For larger stains, use the same ratio (for example, one tablespoon mixed with two cups or 480 ml of water) Let it sit for about five minutes.^{[1]XResearch source}
- As an alternative to soap, you could substitute distilled white vinegar in the same ratio.
Advertisement
3
Blot the area with a sponge or cloth. After five minutes, use a clean, damp sponge or cloth to blot the area you’ve soaked in the detergent solution. Be sure to use cold water to get your sponge or cloth damp. Repeat the process 2 more times to lift all of the residual bleach out from your carpet.^{[2]XResearch source}
- When blotting, work from the outside of the stain toward the center to avoid spreading it.
- Depending on the amount of bleach and how many times you rinse the carpet, you may need to switch to a new rag.

Method 2

Method 2 of 3:

Recoloring a Set Bleach Stain

Download Article

Look in your art supplies or take a few carpet fibers to a store to try to find a matching crayon. Work the crayon into the bleached area, taking care to color down to the base of the fibers. Try to stay within the lines of the stain and avoid coloring unbleached fibers.^{[3]XResearch source} Marker pens may also sometimes be helpful.
2
Dilute the colored patch with a damp towel. Coloring the bleached patch will likely result in a darker hue than the surrounding carpet. Use a damp towel to dilute the color and spread the pigment throughout the bleached area.^{[4]XResearch source}
- Continue to color and dilute until you’ve blended the color to match your carpet.
3
Try using interior paint. If the bleached spot is in an inconspicuous area, you can try using interior paint. Use a fine-tipped paintbrush to apply a thin coat over the stain, and try to paint each fiber from its base to the top. Apply more coats as necessary, but be sure to keep them thin.^{[5]XResearch source}
- The best thing about using interior paint is that you can take some carpet fibers to your local home improvement store and have them match the color precisely.
- Avoid using interior paint in spots that are obvious or receive lots of foot traffic. The paint will make the carpet fibers stiff.
4
Consult a professional carpet cleaner. Ask a professional for help if you’ve tried using crayons or paint without success, or if you don’t want to take the chance recoloring the stain on your own. A professional cleaner can attempt to:
- Clean the stain
- Cut out fibers
- Cut out and replace the affected patch

Method 3

Method 3 of 3:

Taking Precautions

Download Article

1
Read the bleach's label before cleaning the stain. Dish soap and vinegar should both be safe to use on a bleach stain, but even so, read the bleach's directions and warnings before using those or any other product on the stain.
- Many include lists of chemicals that should never be mixed with bleach, like ammonia, which can cause a toxic reaction. Double-check the ingredients of any cleaning or repair product that you intend to use to make sure it doesn't include any of those ingredients.
Keep in mind that bleach can harm your skin. Always wear protective gloves before trying to wash bleach out of your carpet by hand. Do so even if the bleach has dried, since the chemicals are still present even though the moisture isn't.
Fumes from bleach can be overpowering, causing lightheadedness, nausea, and other ailments. If you're using vinegar to clean it up, expect the combined smell to be even more overwhelming. Open some windows and/or set up some fans to draw the fumes away from you while you work on the stain.