Download ArticleDownload ArticleThis article was co-authored by Suzi Quillen and by How.com.vn staff writer, Jessica Gibson. Suzi Quillen is a Knitting and Crochet Expert based in Granite Falls, Washington. After honing a love of knitting and crochet and becoming a crochet pattern designer, Suzi founded Perfectly Knotty in 2014, an online hub for knitting and crochet learners and enthusiasts. Perfectly Knotty offers multiple avenues to inspire creativity in its customers, selling allergy-conscious yarns and fibers, offering crochet and knitting patterns, and providing stitching support via tips and resources.
There are 10 references cited in this article, which can be found at the bottom of the page.
How.com.vn marks an article as reader-approved once it receives enough positive feedback. This article received 12 testimonials and 92% of readers who voted found it helpful, earning it our reader-approved status.
This article has been viewed 526,958 times.
If you'd love to learn how to knit but struggle with using the needles, start with a knitting dolly. To French knit, you simply wrap yarn around a hollow dolly that has pegs at the top. Work the yarn around the pegs to create a long knit cord that comes out of the bottom of the dolly. It's a great introduction to knitting that will give you the confidence to try larger projects.
Steps
Gather your yarn and knitting dolly. Buy a knitting dolly that has 4 pegs at the top. You'll also need yarn that is thin enough to pass through the center of the knitting dolly. Place a darning needle, crochet hook, and scissors at your work space.[1]- For a multicolored effect, choose variegated yarn where the color fades and changes in a single skein.
- If you want to make your own dolly, stick 4 push pins around the edge of a spool of thread.
Tie a slip knot at the end of the yarn. Hold the end of the yarn and twist it into a loop. Leave a 6 to 8 inch (15 to 20 cm) tail at the end of the yarn. While you hold the ends of the yarn, use the fingers on your other hand to pull the loop about 1 inch (2.5 cm) wide. Bring the yarn that's connected to the skein through the loop about halfway. You'll see a loose knot form.[2]- You won't need to secure the slip knot onto 1 of the pegs, but the knot will make it easier to pull the yarn through the dolly.
Advertisement- Thread the yarn through the center of the dolly. Lower the slip knot down through the center of the knitting dolly and snag the slip knot with the crochet hook. Use the hook to pull the yarn completely through the dolly, so about 4 inches (10 cm) of yarn comes out the bottom.[3]
- Hold the dolly with 1 hand and the working yarn with your other hand. If you're right-handed, hold the knitting dolly with your left hand. Take your right hand and hold the yarn that's coming out of the top of the dolly. The yarn will still be attached to the skein, so you may need to unroll the skein a little so you have some more yarn to work with.[4]
- If you're left-handed, hold the dolly with your right hand and use the left hand to hold the working yarn.
- Wrap the yarn clockwise around each peg. Keep the tail yarn secure on the table or hold it in your left hand so the working yarn is taut. Take the working yarn at the top of the dolly and wrap it around 1 of the pegs clockwise. Pull the yarn over the the next peg that's counterclockwise. The yarn should pass through the center of the dolly. Continue to wrap each peg in a clockwise motion before moving to the next peg.[5]
- Once you've wrapped each peg once, you're ready to begin French knitting.
- Wrap yarn around each peg again. Make a second loop of yarn around each peg by wrapping the yarn around each peg again. Remember to wrap the yarn around each peg in a clockwise motion before moving on to the next peg.[6]
- Lift each loop over each peg to make a row of stitches. Take a pick or darning needle and lift the bottom loop of a peg onto it. Lift the loop up and over the other loop on the peg so the stitch drops into the center of the dolly. Move counterclockwise along the dolly, making a stitch for each peg.[7]
- Wrap another round of loops around the pegs. Take the working yarn and wrap it around each peg in a clockwise motion. Remember to work once around the dolly in counterclockwise direction. You should now have 2 loops on each peg.[8]
- Lift the loops to make another row of stitches. Use the pick or darning needle to lift the lower loop over the top loop. Drop the stitch through the center and work around the dolly counterclockwise. You'll start to see a stretchy, 4-sided knitted tube come out of the bottom of the dolly.[9]
- Continue to French knit until the cord is as long as you like. Keep making loops and stitching them through the center of the dolly. You may need to pull your stitches tight by tugging the yarn tail that comes out of the bottom. When you're ready to cast off, leave a single loop on each peg.
- The cord will extend out of the bottom of the knitting dolly as it becomes longer.
- Lift a single loop from 1 peg directly onto the next peg. To begin casting off, lift the single loop from a peg using the pick or darning needle. Lift it off the peg and drop it onto the next peg that's counterclockwise to it. This peg will now have 2 loops while the original peg won't have any.[10]
- You should now have 3 pegs with loops and 1 peg without loops.
- Make a stitch and transfer the remaining loop on the next peg. To cast off, use your pick or darning needle to lift the bottom stitch up and over the stitch on the peg. Drop it through the center, so only 1 loop remains on the peg. Lift the remaining loop up and onto the peg that's next to it counterclockwise.
- You'll now have 2 pegs without stitches.
- Cast off to leave a single loop on the last peg. Tug on the bottom of the cord to tighten the remaining loop on the peg. Cut the yarn to leave a 5-inch (12.5 cm) tail and thread your darning needle on it.[11]
- Tie off the last loop and weave the tail through the center of the cord. Take the yarn on the darning needle and lift the remaining loop onto the needle. Pull the yarn tightly to knot the loop so you can lift it off the peg. Insert the darning through the hollow center of the cord and pull it back out about 2 inches (5 cm) from the bottom. Trim the yarn so it's flush with the cord.[12]
Use your French knit cord. For quick jewelry, sew the ends of the cord together. Use the circle to make bracelets or necklaces that you can embellish with beads, sequins, or crystals. You can also sew the cord together to make swatches of fabric for doll's clothes or simple hats and scarves.- Remember that you can sew together several French knit cords to make larger knit items such as blankets or sweaters.
Expert Q&A
- QuestionHow do I knit on a loom?
Suzi QuillenSuzi Quillen is a Knitting and Crochet Expert based in Granite Falls, Washington. After honing a love of knitting and crochet and becoming a crochet pattern designer, Suzi founded Perfectly Knotty in 2014, an online hub for knitting and crochet learners and enthusiasts. Perfectly Knotty offers multiple avenues to inspire creativity in its customers, selling allergy-conscious yarns and fibers, offering crochet and knitting patterns, and providing stitching support via tips and resources.
Knitting and Crochet ExpertIt varies depending on your loom type, as there are several varieties. Some looms knit in a tube, while others create a double-knit fabric that appears flat but consists of two layers. When embarking on loom knitting, the first step is to identify the type of loom you use. Carefully review any accompanying manufacturer instructions for guidance. Similar to traditional knitting or crochet, it's essential to focus on enjoying the creative process rather than fixating solely on the result. In the context of the notes you provided, which pertain to a round loom for knitting tubes, it's crucial to adhere to the instructions tailored to that type of loom. Manufacturers may offer distinct recommendations and techniques for setup and initiation, even within the category of round looms. Once you grasp the instructions specific to your loom, embrace the enjoyment of the craft. - QuestionWhat can I do if the loop falls off?
Community AnswerIt's pretty easy to spot a fallen loop, so you can just hook it back on. - QuestionHow would I join two pieces of wool?
Community AnswerYou can just tie the ends together. The tied ends will go inside the knitted tube, so that you don't need to worry about hiding them like you would on a flat piece (ie: a scarf or sweater).
Video
Tips
Things You'll Need
- Yarn
- Knitting dolly or spool
- Pick
- Darning needle
- Crochet hook
- Scissors
Expert Interview
Thanks for reading our article! If you’d like to learn more about knitting and crochet, check out our in-depth interview with Suzi Quillen.
References
- ↑ https://youtu.be/slFJA_a0DvI?t=13
- ↑ https://youtu.be/slFJA_a0DvI?t=19
- ↑ https://youtu.be/slFJA_a0DvI?t=32
- ↑ http://www.womansweekly.com/knitting/how-to-do-french-knitting-15375/
- ↑ https://youtu.be/slFJA_a0DvI?t=48
- ↑ https://youtu.be/p-mH-3zB84k?t=74
- ↑ http://www.womansweekly.com/knitting/how-to-do-french-knitting-15375/
- ↑ https://youtu.be/p-mH-3zB84k?t=105
- ↑ https://youtu.be/p-mH-3zB84k?t=105
About This Article
To French Knit, you’ll need a hollow dolly with 4 pegs at the top, a darning needle, crochet hook, scissors, and yarn. Make sure your yarn is thin enough to pass through the knitting dolly. To set up your dolly, you’ll need to tie a slip knot in the end of your yarn and thread it through to the bottom of the dolly. Once you’ve done that, you’ll need to wrap your yarn around each peg of the dolly clockwise. Wrap the yarn around each peg a second time, then use a darning needle to lift each loop over each peg to make a row of stitches. Then, you’ll want to wrap another round of loops around the pegs and lift the loops again. Keep alternating between wrapping the pegs and lifting the stitches to knit the yarn. For more tips, including how to cast off the end of your knitting, read on!
Reader Success Stories
"I bought knitting dollies for my grandchildren but couldn't remember how to use them. Now I have been able to show them how to do it. They are making mats for their dolls houses."..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
