How to Flat Iron Short Hair

Flat ironing your hair can be difficult, especially if your hair is short. But with a little caution and the right tools, your short hair can easily be tamed. You should always keep in mind that excess heat can damage your hair, and that moderate frequency straightening is the safest bet for preventing damage.^{[1]XResearch source}^{[2]XResearch source}

Part 1

Part 1 of 2:

Preparing Your Hair for Straightening

Download Article

Different styles of flat iron are intended for different purposes. Hair that is is especially short and/or fine can benefit from the precision offered by a thinner plate flat iron.^{[3]XResearch source} The thinner-sized plate will be more maneuverable, which can lead to more efficient straightening while decreasing the chances of you getting burned.
If you don't have an appropriate flat iron, you'll need to buy one at a local boutique or borrow one from a friend. You will also need a heat protectant product to prevent your hair from being damaged by excess heat, and brushes to help with styling and blow drying.^{[4]XResearch source}
Advertisement
Oils and any dirtiness that may have accumulated in your hair might cause less-than-desirable results when ironing.^{[5]XResearch source} Use your normal shampoo to thoroughly wash your hair. Rinse your hair of the shampoo and follow it with a deep conditioner, allowing this to remain in your hair for the time recommended on the label, and then rinse once more.
^{[6]XResearch source} You'll want to do this thoroughly until moisture has left your hair entirely.^{[7]XResearch source}^{[8]XResearch source}^{[9]XResearch source} Flat ironing wet hair can lead to damage.^{[10]XResearch source} While drying your hair, you also have a good opportunity to comb or brush out any tangles or snarls.
5
Divide your hair into layers. For short hair, you might only have one or two layers, depending on your hair thickness. Layering your hair is important because it creates even sections of hair, which will be easier for you to manage while ironing. This can also prevent you from accidentally going over a section you've already ironed, which can cause heat damage.^{[11]XResearch source}
- Collect the hair you are sectioning off for later atop your head and clip it out of the way while you work on lower layers.
Inspect the flat iron for dirtiness before use. You can effectively clean your flat iron while it is unplugged and cool with a clean rag dampened with rubbing alcohol.^{[12]XResearch source} Wipe your plates dry with a fresh cloth and your flat iron should be ready to straighten.
7
Heat your iron. There should be a few different settings available on your iron. While there is no hard-and-fast rule for temperature, as each persons' hair will respond to the heat of your flat iron differently, the following generally applies:
- 250–300° for fine or damaged hair.
- 300–350° for medium/average hair.
- 350–400° for thick or coarse hair.^{[13]XResearch source}^{[14]XResearch source}

Part 2

Part 2 of 2:

Flat Ironing Your Short Hair

Download Article

You should first consult the label of your product, as your brand of heat protectant may have special instructions. Most heat protectants should be applied to wet hair that has already been deep conditioned, so the a good time to administer this product is after washing your hair.
2
Iron your bangs, if applicable. Bangs are already divided from the hair on the crown and sides of your head and are easy to see, making this a great place for you to start. Work your way from the root to the tip of your hair.^{[15]XResearch source}
- Depending on the curliness or waviness of your hair, you may have to run your hair through the iron a few times.
- If your hair is long enough, consider running a comb through your hair and following it with your straightener.^{[16]XResearch source}
3
Straighten from bottom layer to top layer in segments. Take your bottom layer in segments and work these from the root of the hair to its end, slowly sliding your flat iron down each length of hair. Repeat this process a few times until you achieve the desired result.^{[17]XResearch source}
- Exercise caution when ironing close to your scalp or ears. The heated ends of your flat iron will burn you if you are not careful.
You can clip sections of straightened hair aside by using an alligator clip or hair tie. This will make it easier for you to iron each section while minimizing your chances for unnecessary over-ironing.
5
Straighten the sides of your head. You'll likely need to clip the top layers of the hair on the sides of your head out of the way, if you haven't already done so. Start with the bottom layer and in smooth motions, draw your iron steadily through segments of your bottom layer until you are satisfied.
- Gather finished hair together out of the way and then release the next layer of hair from the unfinished top layer that you clipped aside earlier.
- Ironing at an angle in front of a mirror can give you a better view of the hair you are working on, allowing you to be more precise when straightening.
The hair at the top (also called the crown) of your head can be difficult to manage. By pulling your hair upwards toward the ceiling, you'll give your flat iron better access to the roots of the hair there and improve hair volume.^{[18]XResearch source}
The hair at the back of your head is difficult to see and ironing it can be awkward.^{[19]XResearch source} Divide hair at the back of your head down the middle vertically, and then pull it to either side of your head. Now you can stand at an angle to a mirror and have a decent view of the hair you are straightening.

Community Q&A

Search

Add New Question

Question
I want to flat iron my hair, but it's a pixie cut. Can I still straighten it?
Community Answer
It depends on how long the pixie cut is. Is your hair is long enough to fit in between the clamps of the flat iron?
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 17
Question
Should I put some kind of creams on my hair after iron it?
Community Answer
After you flat iron your hair you should put some oil in to nourish it because it becomes very dry. Try argan oil, or for a cream, TRESemme Expert Selection Beauty-Full Volume Hair Maximizer.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 7
Question
How long do I hold it on my hair?
Community Answer
Not long. Place it close to your roots (without burning your scalp), then run it down your hair. Do this again if it doesn't work with one run.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 6