How to Fish for Bass

Whether you’re a competitive sports fisher or just want to spend a fun afternoon with your family on the lake, bass fishing is a difficult pastime if you aren’t properly equipped. Nature is unpredictable but if you understand the habits of bass and the conditions that you are fishing, you can employ the most effective techniques and equipment for landing a spectacular catch.

Part 1

Part 1 of 5:

Knowing Your Fishing Conditions

Download Article

1
Understand the habits of bass during each season. Spring and summer provide ideal fishing conditions as bass will feed closer to shore early in the morning and move out into open water around creek channels and structures later in the day.
- Divide spring into 4 segments to optimize the spawning behavior. Pre-spawn, spawn, post-spawn, and late spring require different approaches.^{[1]XResearch source}
- Pre-spawn has you fishing at around 8–15 feet (2.4–4.6 m) in depth, spawn moves you up to a shallower depth towards their spawning beds, post-spawn moves you back down to 8–15 feet (2.4–4.6 m), and late spring is the optimum time to fish around structures and the shore.
- During winter and lower temperatures, bass will not expend much effort and will only bite when your lure is immediately within their strike zone.^{[2]XResearch source} Bass are erratic during fall but will feed closer to shore as the temperature drops.
2
Optimize your terrain. Bass like to stay close to certain areas or hide within debris depending on the weather, time of day and which phase of their spawning cycle they are in. Vegetation, rocky bottoms, shallow flats, fallen trees, structures, bushes and grass are all great places to set your cast.
- Bigger bass often hang out underneath docks.
Advertisement
Bass like to feed closer to shore in the morning and move out into open water later in the day. Fish off structures in late afternoon as bass will look for shade and deeper water.

Part 2

Part 2 of 5:

Picking the Right Lure

Download Article

1
Fish with crankbaits when you want to cover a lot of water. Crankbaits are best in light vegetation, rocky bottoms, shallow flats, and through bushes and grass. These lures are quite versatile.^{[3]XResearch source} Crankbaits come either lipless or with a lip and each is effective depending on the depth and the speed at which you reel.^{[4]XResearch source}
- Use lipless crankbaits if you’re fishing in 1 foot (0.30 m) of water or if you’re fishing as deep as 50 feet (15 m). You will have to reel faster or use a lighter lure in shallow water, whereas you will reel slower or use a heavier lure when fishing deeper water.^{[5]XResearch source}
- Use a specific lipped crankbait depending on the depth of the water because they are classified as shallow, medium or deep diving based on a 10 lb (4.5 kg) nylon monofilament or fluorocarbon line.^{[6]XResearch source}
- The lure will not dive as deep if you use a higher pound line. The effect increases as the diameter of the line increases.
- Use square bill crankbaits or crankbaits with round, stubby lips and sharp angled off noses when fishing for bass in shallow water, around wood or rock.^{[7]XResearch source}
- Deploy medium-diving crankbaits when fishing in a 5–10 feet (1.5–3.0 m) range. If you’re fishing 12 feet (3.7 m) or deeper, use deep-diving crankbaits.
- Lipless crankbaits can easily be ripped out of grass or bumped along a clean bottom whereas a lipped crankbait will hit something and kick outwards because the lip acts as a deflector.^{[8]XResearch source}
- The shape of your crankbait determines how much movement you will get, which is important depending on the temperature of the water as bass are less active in colder temperatures.
- With a more rounded-bodied crankbait you’ll get a wide wobble that is attractive to bass that are aggressive, usually when water is warmer; in contrast, a flat crankbait with narrow sides will have a tighter wiggle that is more appealing to bass in cold water who won’t react to large movements.^{[9]XResearch source}
2
Fish with spinnerbaits when you want to fish through quick cover. Thanks to their unique blade shape, they can dive and be retrieved quickly.^{[10]XResearch source} Spinner baits work best when it’s windy and cloudy because they are meant to cause a reaction from the bass. Use faster spinner baits in clearer water and slower ones in muddier water.
- Cast close to you first then cast farther away to cover larger areas without spooking the fish. Aim to vary the speed at which you retrieve your cast and the amount of time you let the lure sink before reeling it in.
- Choose spinnerbaits in standard or weedless. A weedless spinnerbait is a good option if you are fishing in a lot of cover, but are also harder to set the hook on. Add a cheater hook to catch short striking fish.
- There are 3 major blade types: leaf, Colorado, and Indiana. Each blade type is effective for different conditions.
- The leaf blade is most effective when fishing through grass and in clear water when you want a fast retrieval. It is a long slender blade with rounded points on either end to allow a faster spin and less water resistance.
- Deploy the Colorado blade when fishing at night or in muddy and murky water. The rounded shape allows it to spin slower giving the bass more opportunity to bite.
- Utilize the Indiana blade as a compromise to the slower Colorado blade and faster leaf blade.
- The larger the blade means that it is easier to maneuver around stumps, rocks, and other debris, while narrow blades move quickly through sparse grass.
3
Fish with topwater lures in very shallow water. These are also effective in areas that are covered in surface vegetation, such as lily pads. These lures are meant to ripple the water surface with popping and splashing as you retrieve it.^{[11]XResearch source}
- In the spring, bright colors work best, and in the fall and winter, black white or gray work well.
- Choose topwaters that produce a lot of noise and splash to get the bass' attention.
- Topwater lures come in walkers, poppers, wakebaits, minnows/twitch baits, prop baits, buzzbaits, and frogs. Each different type of topwater lure is most effective in different conditions.^{[12]XResearch source}
- Walkers are most effective when covering a lot of top water quickly because it keeps the bait in striking distance for the bass.
- Poppers should be deployed when fishing around stumps, docks, bushes, rocks, and small areas that are covered because these lures will aggravate bass into biting. They are also great for fishing in creeks.
- Wakebaits work best in clear water when fish are attracted to the V shaped wake.
- Minnows/twitch baits excel in clear lakes or small areas where bass may spook at aggressive lures. They are great during spawning when bass are guarding their nests.
- Prop baits should be used in places with a lot of grass, especially during spawning season. They create a lot of movement even without moving a great distance, which keeps them in a bass’ striking range longer.
- Buzzbaits should be used in sparse grass and places where you feel your lure might get snagged but you still want a topwater presentation. These are most effective after spawning during the late summer.
- Frogs are meant to mimic real frogs so use them effectively around heavy grass. They can also be used around cover as they are one of the toughest lures to snag. Bot frogs and mice are great for fishing in lily pads.
4
Fish with jigs when you want a very accurate feel on the line. Jigs are also good when you’re using short-range flipping and pitching techniques instead of casting out into the distance. The common plastic skirting attracts bass all year round.^{[13]XResearch source}
- Bass will usually hit a bait while it is falling, so after it has sat on the bottom for a bit give the rod tip a small twitch to see if anything has picked up your bait.
- Jigs are most effective when employed in cover or closed to cover so be aware of the risk of getting snagged. Jigs are meant to imitate crawfish so try to make them scoot along the bottom.^{[14]XResearch source}
- Both jigs and plastic worms are best used slowly.
- Use a ¾-ounce jig when fishing through thick grass.
- Jigs are also effective when fishing on docks and piers because they provide protection from predators.
5
Fish with plastic and rubber lures to imitate worms or lizards. These lures are the most versatile and the most effective because they are so lifelike. They can also be fished weighted or weightless.^{[15]XResearch source}
- Floating plastics can be used just like a topwater, and any type of plastic can be fished weedless to allow fishing in extremely heavy vegetation.
- Fish with plastic/rubber lures in the Winter when bass are not very active. These lures can still be effective in warmer weather if you employ slightly more movement but the only time these lures are ineffective are when bass are very active.^{[16]XResearch source}
- Plastic/rubber lures work best when water is over 55 °F (13 °C). Use large lures that are 7–10 inches (18–25 cm) when the water is murky but shorter lures that are 4–5 inches (10–13 cm) when the water is clear and the bass are lethargic.^{[17]XResearch source}
- Both rigs and plastic/rubber lures are best used slowly.

Part 3

Part 3 of 5:

Selecting the Right Line

Download Article

1
Match your line with the diving depth. Pair the correct size of line with your crankbait according to how deep you want the bait to run.
- For example, use a 10 lb (4.5 kg) fluorocarbon line to lighten up a deep diving crankbait or you can use the same 10 lb (4.5 kg) fluorocarbon line to get a medium diving crankbait to stay at its deepest range.^{[18]XResearch source}
2
Choose lighter spinnerbaits for shallow water and heavier lures for deeper depths. The weight will range from ⅛ ounce to 2 ounces.
- Remember that the slower you reel, the deeper your lure will swim while reeling fast keeps your lure shallow.
- Blade size also affects how deep your lure will go but you can also add a trailer to your hook for buoyancy and movement.
Plastic/rubber lures come in different shapes and sizes but remember they are meant to mimic worms or lizards so use lines that won’t easily get snagged in vegetation or debris where worms or lizards would commonly be found.^{[19]XResearch source}

Part 4

Part 4 of 5:

Choosing the Right Rod

Download Article

1
Employ a lightweight rod for buzzbaits and spinnerbaits. The ideal rod is lightweight, 6.5–7 feet (2.0–2.1 m), with a medium action and medium soft tip. It’s important to ensure you use a sensitive rod because bass will often bump the blade before it strikes.^{[20]XResearch source}
- The lighter the rod is, the more sensitive the rod will be.
- A shorter rod will give you more accuracy in your cast but a longer rod will give your more power to set your hook, leverage when reeling in your bass, and distance to your cast.
2
Employ a sensitive and lightweight rod for crankbaits and topwater lures. The ideal rod is lightweight, sensitive, 6–7 feet (1.8–2.1 m), fiberglass, and has a medium action tip or a light action tip based on the weight of your lure.^{[21]XResearch source}
- A medium action rod can also be used if it can set the hook and be flexible during your cast. A ⅛-ounce lure needs a light tip while a 314-ounce lure needs a medium tip.
- A sensitive rod helps you determine what type of structure you’re coming into contact with.
- A 7 ft (2.1 m) rod is effective when casting out a far distance and when using heavier baits. A 6 foot rod are more effective for accuracy when trying to cast towards fallen trees or in between structures.
- Fiberglass rods allow bass to inhale the hook before it’s set as the flex on the rod keeps the hook from becoming dislodged.
3
Employ a sensitive and lightweight graphite rod when using jigs or plastic/rubber lures. The ideal rod is lightweight, extremely sensitive, 6.5–7 feet (2.0–2.1 m), graphite, and has medium action and a medium light tip.^{[22]XResearch source}
- When fishing deep water, sensitivity and weight are imperative so you can feel the bites without getting fatigued from holding up the rod in a 9 to 10 o’clock position over long periods of time.
- Use a 6.5 ft (2.0 m) rod when fishing structures 20 feet (6.1 m) or deeper and a 7.5 ft (2.3 m) rod when fishing anywhere shallower than 20 feet (6.1 m).
- Graphite is faster and more sensitive than fiberglass, which allows you to set the hook fast. It’s vital to have a soft tip to ensure that there’s tension with the bass at all times as you can easily lose a fish if only the point of the hook is embedded.

Part 5

Part 5 of 5:

Employing the Right Technique

Download Article

1
Pitch your bait into or near visible brush and underwater debris. Bass hang out near and under structure to wait for an ambush opportunity to feed. As you become more confident with your cast, try skipping your bait off of structures to solicit a reaction strike from a nearby bass.
- Bass will strike lures when they are hungry and when they are irritated.
- Cast your lure near potential hiding spots for bass and retrieve it at a slow to moderate speed, imitating the movement of prey.
- In areas with heavy cover, use the flipping and pitching technique to drop your bait quietly into likely hiding places.
- In warmer weather, try topwater lures like frogs or poppers. The explosive strikes on the surface can be very exciting.^{[23]XResearch source}
2
Cast your line and bait parallel to the shore and draw the bait back toward you. This will give your lure/bait a longer time in the strike zone and will, in time, increase your strike percentages because you're extending your bait's exposure to bass.
- A savvy angler will work the percentages but don’t be discouraged when you don’t get a bite.
3
Mimic fleeing or helpless prey with erratic movements. Do this when using topwater lures to activate the feeding and agitation response from bass.^{[24]XResearch source} Create a back-and-forth or zig zag pattern on the surface of the water when you employ a walker lure. Snap your wrist and rod tip downward at a sharp angle and then point the rod tip back to the lure quickly so it glides. Give a series of fast snaps to make the bait move from left to right.
- Snap your rod tip downward to activate a poppers concave mouth and narrow tail.
- Steadily retrieve your wakebait to utilize its sharp angled lip to cause it to shimmy back and forth.
- Twitch and float minnows/twitch baits back to the surface to attract bass guarding their nests during spawning.
- Use a series of short jerks on your rod to spray water with prop baits.
- Steadily retrieve your buzzbait to employ its blade to curl the water, spitting and spraying during quick jerks.
- Twitch frogs along the top of grass and water to get bass to explode onto your lure.
4
Cast out a jig lure and give the line plenty of time to hit the bottom. Jigs and plastics are fished differently than other types of lures. Instead of reeling in to produce the "action," the bait is retrieved by moving the rod tip.
- After the bait has hit the bottom and you have given it a twitch, slowly lift the rod tip until it points straight up in the 12 o'clock position. Let it sit there for a moment and then drop it down to the 9 - 10 o'clock position and reel in the slack. Repeat these steps until your line is in.
- You'll have to have a good feel for your line to tell when a fish is biting so most people hold their finger against the line while lifting the rod tip.
- Look for sudden resistance or bumping on the line, a line that goes slack suddenly or veers sideways. To set the hook, drop the rod tip very quickly to the 3 o'clock position, and pull back hard to 12 o'clock.
- Use jigs around fallen trees where bass are hiding.
- Brush piles on a rocky bottom, standing timber, thick grass, and flats are all prime locations to employ a jig.
- Pitch or flip a jig around the angles where limbs connect to the trunks of fallen trees. Let the jig fall to the bottom with a semi-tight line.^{[25]XResearch source}
- Drag or hop your jig down ledges or drops to mimic the movements of a crawfish.
5
Lift and drop the rod as you take up the slack of the line for rubber lures. To fish a plastic/rubber lure, use the same technique as you would when using a jig. Don’t reel plastic or rubber lures in but rather retrieve them with purpose by lifting and dropping the rod. Cast out and give the line plenty of time to hit the bottom.
- After the bait has hit the bottom and you have given it a twitch, slowly lift the rod tip until it points straight up in the 12 o'clock position. Let it sit there for a moment and then drop it down to the 9 - 10 o'clock position and reel in the slack. Repeat these steps until your line is in.
- You'll have to have a good feel for your line to tell when a fish is biting so most people hold their finger against the line while lifting the rod tip.
- Look for sudden resistance or bumping on the line, a line that goes slack suddenly or veers sideways. To set the hook, drop the rod tip very quickly to the 3 o'clock position, and pull back hard to 12 o'clock.
- Flipping and pitching: This technique involves using a short, heavy rod to make short, accurate casts under overhanging trees, bushes, or docks. Drop the bait into the water and let it sink to the bottom, then reel it in quickly to avoid getting snagged.
- Jigging: Jigging involves bouncing a weighted lure up and down through the water column, imitating the movement of a wounded baitfish. Jigs can be rigged with plastic grubs or crawfish tails, and can be used to fish deep or shallow waters.
- Trolling: Trolling involves slowly dragging a lure or bait behind a boat, covering a lot of water and attracting fish along the way. Use a variety of lures at different depths to find what the fish want.
- Topwater fishing: Use noisy, surface lures like poppers or buzzbaits to attract bass that are feeding on the surface. Cast near underwater structures or weed beds, and retrieve the lure in a slow, rhythmic manner.
- Drop shooting: This is a finesse technique that involves using a light rod and a weight attached to the line above the bait. The bait is suspended above the bottom, where the bass can see it and are tempted to bite.

Expert Q&A

Search

Add New Question

Question
What are some of the most common mistakes people make when getting prepared to fish?
Kathy Sparrow, MA
Fishing Instructor
Kathy Sparrow is a fly-fishing instructor and adventurer at heart. Kathy is the co-founder and previous manager of the Kingfisher Inn, a fly-fishing lodge on the Lower Laguna Madre in Texas. She is the author of "On the Mother Lagoon: Flyfishing and the Spiritual Journey" and "The Whispered Teachings of Grandmother Trout” a novel conveying the feminine perspective of fly fishing. Kathy is also a Certified Canfield Trainer in Canfield Methodologies. She guides individuals through the process of embracing change by expressing confidence, awareness, and courage through the tools of writing, fly fishing, and intentional conversation. She has a MA in English with an emphasis in Literature and Cultural Studies from the University of Texas-Pan American.
Kathy Sparrow, MA
Fishing Instructor
Expert Answer
Probably not preparing for the weather. It's going to rain sometimes. Always keep rain gear ready. Having backup equipment is also really important. Make sure you have two rods with you because things happen. Polarized glasses are an absolute must. Those allow you to see into the water. Mindset is the other thing to prepare. Go with a sense of adventure. Know that you're probably going to make mistakes, we all do. You might not catch fish and that's okay but you're going to learn something in the process and if you do catch fish, that's a bonus.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 0
Question
How can I find the fishing license requirements for my region?
Kathy Sparrow, MA
Fishing Instructor
Kathy Sparrow is a fly-fishing instructor and adventurer at heart. Kathy is the co-founder and previous manager of the Kingfisher Inn, a fly-fishing lodge on the Lower Laguna Madre in Texas. She is the author of "On the Mother Lagoon: Flyfishing and the Spiritual Journey" and "The Whispered Teachings of Grandmother Trout” a novel conveying the feminine perspective of fly fishing. Kathy is also a Certified Canfield Trainer in Canfield Methodologies. She guides individuals through the process of embracing change by expressing confidence, awareness, and courage through the tools of writing, fly fishing, and intentional conversation. She has a MA in English with an emphasis in Literature and Cultural Studies from the University of Texas-Pan American.
Kathy Sparrow, MA
Fishing Instructor
Expert Answer
Search Google for fishing license plus the name of the state. In most places, you can get your license immediately. A lot of states also have a phone app, so your fishing license is digital, which makes it easy.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 1
Question
About how long does it take for bass to bite?
Community Answer
It can take anywhere from a few minutes to a few hours. It all depends on the time of year and the bait you are using -- there is not one right answer to this question. Fishing is all about developing patience and enjoying the journey, not just the results.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 47

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Don't ignore the creature baits and artificial worms -- many experienced bass anglers will confirm this suggestion: without fail, the largest bass ever caught have been snagged using these simple baits and techniques with a spinning reel/rod combo.
Thanks
Helpful0 Not Helpful0
Scents and weights may increase your chance of catching a fish. Try a wide variety to see which one is right for the area you are fishing in.
Thanks
Helpful0 Not Helpful0
Don't depend solely on artificial lures -- a nice night crawler may also produce spectacular results.
Thanks
Helpful0 Not Helpful0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Be sure you have a license to fish.
Thanks
Helpful69 Not Helpful26
Think twice about eating a bass you may catch. Reservoir and retention ponds can produce some large bass; however, retention ponds collect runoff wastes and toxins from groundwater. Eating these fish may be hazardous to your health. Conversely, bass caught from larger lakes and rivers are your best bet for fish not as likely to be toxic with metals such as mercury and other contaminants. This is due, in large measure, to the fact that lake water is replenished to varying degrees by feeder-rivers and underground springs.
Thanks
Helpful12 Not Helpful10