Download ArticleDownload ArticleHow.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 14 people, some anonymous, worked to edit and improve it over time.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 544,340 times.
Learn more...
In order to fake a fingerprint, one needs an original first. For most home experimenters, this starts by pressing a finger into a piece of putty. Latent fingerprints, or the invisible residue left by fingers, can be used to create a fake fingerprint, but this takes significantly more effort and equipment.
Steps
Get a fingerprint mark on a putty-like material. Putty, Play-doh, or modeling clay are all good options, as long as they are clean and new. Roll a small piece of your chosen material into a ball, and press the finger you wish to imitate into the putty.[1]- A hot, flattened piece of paraffin wax will leave a better impression, but only after five or ten minutes of pressing.
Refrigerate or freeze the putty. This will keep the impression of the fingerprint as hard as possible while you work with it. Different materials and brands will react differently to cold, and may not be usable as putty afterward — but that's fine for this purpose.Advertisement
Make extra-thick gelatin. Boil a small pot of water, then add an equal amount of gelatin powder by volume.[2] Stir constantly for several minutes, dissolving as much of the powder as you can. Let the mixture cool.
Microwave the gelatin. Once the gelatin has cooled to a thick gel, melt it in the microwave, then let cool to a gel again. Microwave repeatedly until the gelatin has no bubbles, and when a drop acts thick and rubbery.[3]
Pour the gelatin onto the fingerprint mold. Once the gelatin is rubbery and bubble-free, melt it one final time, then pour the hot, liquid gelatin into the fingerprint mold you made from putty.
Freeze the putty. Put the putty and gelatin into the freezer. Within a few minutes, the gelatin should harden into a solid, rubbery substance. Peel the gelatin carefully off the putty. You now have a fake fingertip, with the impression of a real fingerprint marked on the surface.
Read through the method before attempting. This method can make a much more accurate fingerprint, and does not require an impression in putty, but it requires specialized equipment. Do not attempt this unless you have access to these tools, including a high-quality scanner or camera, and a printed circuit board (PCB). An overhead transparency can be used instead of the PCB, but this is less effective.[4]
Dust to find fingerprints. This method can create a fake fingerprint from nothing more than a fingerprint left on a touchscreen, a doorknob, or another dry, glossy surface. To locate these, you can dust a surface with crushed, powdered graphite from mechanical pencil lead, or use a fingerprinting kit with a black powder.- A white surface will work best with this method.
Take a high quality scan or photograph. For best results, photograph or scan the fingerprint with a quality of at least 2400 dpi.[5] Load the resulting image into a computer with photo editing software.
Invert the image's direction and color. Use the photo editing software to "flip" the image from left to right, creating its mirror image. Reverse the color of the image as well, so the raised fingerprint is white and the background of the image is black.[6]
Transfer this to a printed circuit board or overhead transparency. For best results, print out your fingerprint onto tracing paper, then use a UV etching machine to transfer the fingerprint onto a printed circuit board (PCB).[7] If you do not have access to these materials, you can try the less effective method of printing out the fingerprint directly onto an overhead transparency sheet.
Make your fake finger from graphite and wood glue. The fingerprint image on the PCB or overhead transparency is actually slightly raised, and can be used to make a fake fingertip. To do this, cover the image with graphite powder, then smear it with a thin layer of white wood glue or light-colored latex milk.[8]- A small dash of glycerin in the wood glue will make it slightly more moist and workable, creating a more effective material.
Remove the dried glue fingerprint. Once the wood glue has dried, carefully peel it off the surface beneath and take a look at your new fingerprint. You can even trim this to fingertip size, then use theatrical glue to attach it to your own finger.
Community Q&A
- QuestionIs this illegal?
Community AnswerNo, this is not illegal. - QuestionI want to host a murder mystery activity for my family and I have images of fingerprints, but how do I put them on surfaces?
SaraCommunity AnswerCut them out and stick them onto furniture or whereve you want to put them.
Tips
- The mark on the piece of putty can't be used directly, since the fingerprint will be a mirror image of the actual finger.Thanks
References
- ↑ https://www.youtube.com/shorts/oXNhj_-SQgg
- ↑ https://www.youtube.com/watch?v=YUkbaswGHek
- ↑ http://cryptome.org/gummy.htm
- ↑ http://www.ccc.de/en/updates/2013/ccc-breaks-apple-touchid
- ↑ http://www.ccc.de/en/updates/2013/ccc-breaks-apple-touchid
- ↑ https://www.researchgate.net/figure/Reconstructed-fingerprint-image-a-fingerprint-printed-on-the-PCB-b-fake-silicon_fig2_220929526
- ↑ https://www.researchgate.net/figure/Reconstructed-fingerprint-image-a-fingerprint-printed-on-the-PCB-b-fake-silicon_fig2_220929526
- ↑ https://www.researchgate.net/figure/Reconstructed-fingerprint-image-a-fingerprint-printed-on-the-PCB-b-fake-silicon_fig2_220929526
About This Article
If you want to make fake fingerprints, start by pressing your finger into a putty-like material, like play-doh or modeling clay. For a better impression, use a flattened piece of paraffin wax and press into it for 5 to 10 minutes. Once you have a clear fingerprint in the putty, place it in the refrigerator or freezer to get the material as hard as possible. As the putty hardens, boil a small pot of water and add an equal amount of gelatin powder by volume. Stir until the gelatin dissolves before letting the mixture cool. To get the bubbles out of your gelatin, alternate microwaving and cooling it until it becomes thick and rubbery. Then, pour the gelatin into the mold and freeze the putty again to form a fake fingertip you can use to make fake fingerprints. For more help, like how to copy fingerprints you found on a doorknob, scroll down.
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
