How to Extinguish a Fire at the Initial Stages

Download ArticleDownload Article

When a fire first ignites, it may be small enough that you can extinguish it with a fire blanket or a fire extinguisher on hand. By being prepared and quickly determining the type of fire with which you’re dealing, you have an even better chance of not only extinguishing the fire but also of doing it without risking injury. However, remember that the safety of everyone in the proximity—including you—comes first. If the fire is quickly spreading, producing dangerous amounts of smoke, or taking longer than five seconds to defeat with a fire extinguisher, then you must pull a fire alarm, evacuate the building, and call 911.


Method 1
Method 1 of 3:

Extinguishing Electrical Fires

Download Article
  1. How.com.vn English: Step 1 Stop the fire before it starts.
    The majority of electrical fires stem from faulty electrical wiring or poor maintenance of electrical systems. To stop an electrical fire before it starts, do not overload electrical outlets and ensure that all electrical work is performed to code by a licensed electrician.[1]
    • Also keep electrical systems clear of dust, trash, and spider webs, which can all lead to fires.[2]
    • You should also use circuit breakers and fuses as often as possible, which are easy steps to take in order to stop a power surge from starting a fire.[3]
  2. How.com.vn English: Step 2 Turn off power to the electrical system.
    If an electrical system begins sparking or a fire ignites at a wire, appliance, or outlet, then cutting the power to the system is the first, best step to take.[4] If the source is only sparking or the flame has not yet spread at all, this step alone may be enough to extinguish the flame.
    • You should cut the power at the breaker box rather than turning off the wall switch connected to the outlet.[5]
    • If the problem stems from wiring or an appliance, do not simply pull the plug on the device. The electrical problem occurring could very well be creating an electrocution hazard as well.
    Advertisement
  3. How.com.vn English: Step 3 Use a Class C-rated extinguisher if you cannot cut the power to the source.
    The acceptable type of fire extinguisher in this situation depends entirely upon if you are able to cut the power to the source or not. If you don’t know where the breaker is, the box is locked, or it would simply take way too long to access, then you must use a Class C-rated fire extinguisher.[6] Class C extinguishers are either carbon dioxide (CO2) or dry chemical extinguishers, and they will specifically include “Class C” on the label on the canister.[7]
    • To use the extinguisher, pull any pin stopping you from depressing the handle, point the horn at the base of the fire, and hold down the handle.[8] As you see the flames shrinking, approach the source and continue spraying until the fire is fully extinguished.[9]
    • If you cannot extinguish the fire within five seconds of using the extinguisher, then it’s too large.[10] Evacuate to a safe place and call 911.
    • Since the faulty wiring is still receiving power in this case, the fire can reignite. You should still cut power to the source as soon as possible.
    • You must use a Class C extinguisher because they contain non-conductive substances. A Class A extinguisher will only contain highly pressurized water, which conducts electricity and can create electrocution risks.[11]
    • Another way to identify CO2 and dry chemical extinguishers is by their red coloring (water extinguishers are silver). CO2 extinguishers also have a hard horn at the tip instead of just a hose, and they lack a pressure gauge.[12]
  4. How.com.vn English: Step 4 Use a Class A or dry chemical extinguisher if you have cut the power.
    If you are able to cut the power to the source completely, then you have turned the Class C electrical fire into a standard Class A fire.[13] In this case, you can use a water-based Class A extinguisher in addition to the previously mentioned extinguishers.
    • Class A extinguishers and multipurpose dry chemical extinguishers are actually recommended in this scenario because CO2 extinguishers run a higher risk of the fire smoldering and reigniting once the CO2 dissipates.[14] CO2 extinguishers can also cause respiratory problems in confined spaces such as houses or small offices.[15]
  5. How.com.vn English: Step 5 Use a fire blanket to smother the fire.
    Alternatively, you can use a fire blanket to smother the fire, but this step is only applicable if you were able to turn off the power to the source completely. Though wool (most fire blankets are chemically treated wool) is a good insulator of electricity, you still don’t want to get close enough to the source and risk electrocution if the power remains on.
    • To use a fire blanket, remove from its packing, grip the unfolded blanket in front of you with your hands and body protected by it, and drape the blanket over the small fire. Do NOT throw the blanket at the fire.
    • Not only is this very effective in the early stages but does not damage surrounding area or objects.
  6. How.com.vn English: Step 6 Use water to extinguish the fire.
    If you don’t have any type of fire extinguisher or fire blanket around, then you can use water; however, ONLY use water if you have 100% turned the power to the source OFF. Otherwise you not only risk electrocution, but also spreading around the electricity, which can spread the fire much more quickly. Throw the water at the base or seat of the fire.
    • Water at the speed you can draw it from a sink will only be effective if the fire is very small and contained. Otherwise, it will spread faster than you can douse it.
  7. How.com.vn English: Step 7 Call 911.
    Even if the fire is out, you should still call 911.[16] Smoldering objects can reignite, and proper firefighters will be able to isolate and remove any risks completely.
  8. Advertisement
Method 2
Method 2 of 3:

Extinguishing Liquid/Oil Fires

Download Article
  1. How.com.vn English: Step 1 Shut off the fuel supply.
    In applicable situations, the first thing you should do for fires involving flammable liquids is to turn the fuel supply off. For instance, if a static discharge ignites gasoline around a fuel pump, the first thing you should do is hit the emergency shutoff valve located nearby at all pumping stations. This act severs the small fire from the very large fuel sources around it.
    • In many instances where the flammable liquid is the only fuel source, the fire may extinguish itself as soon as you cut the fuel supply.
  2. How.com.vn English: Step 2 Use a fire blanket to smother the fire.
    You can also use a fire blanket on small Class B fires. If a fire blanket is readily available, this can be the easiest, least damaging method to extinguish it.
    • To use a fire blanket, remove from its packing, grip the unfolded blanket in front of you with your hands and body protected by it, and drape the blanket over the small fire. Do NOT throw the blanket at the fire.
    • Ensure the fire is not too large for the blanket to smother it. Vegetable oil igniting in a frying pan, for instance, is a small enough fire for a fire blanket.
  3. How.com.vn English: Step 3 Use a Class B fire extinguisher.
    As with electrical fires, water-based (Class A) fire extinguishers should not be used on liquid or oil fires. Carbon dioxide (CO2) and dry chemical fire extinguishers will have a Class B rating.[17] Check the label on the extinguisher and ensure that it says Class B before using it on a flammable liquid fire.
    • To use the extinguisher, pull any pin stopping you from depressing the handle, point the horn at the base of the fire, and hold down the handle.[18] As you see the flames shrinking, approach the source and continue spraying until the fire is fully extinguished.[19]
    • If you cannot extinguish the fire within five seconds of using the extinguisher, then it’s too large.[20] Evacuate to a safe place and call 911.
    • The only exception to this rule when the liquid fire stems from vegetable oil or animal fats in commercial-size deep fryers and other restaurant equipment. The large size and extreme heat and fuel source of these devices get their own classification for fire extinguishers—Class K extinguishers. Restaurants with this type of equipment are legally required to keep a Class K extinguisher present.
    • Do NOT throw water on liquid or oil fires. Water does not mix with the oil. When they are together, the oil stays on top of the water. The water will then boil and become steam 'very quickly.’ This quick boil is dangerous. Since the water is on the bottom of the oil, it sprays hot, burning oil in every direction as it boils off and evaporates. This then spreads the fire very quickly.
  4. How.com.vn English: Step 4 Call 911.
    Even if the fire is out, you should still call 911.[21] Smoldering objects can reignite, and proper firefighters will be able to isolate and remove any risks completely.
  5. Advertisement
Method 3
Method 3 of 3:

Extinguishing Organic Fires

Download Article
  1. How.com.vn English: Step 1 Use a fire blanket to extinguish the fire.
    If the fuel source for the fire is a solid combustible material—wood, cloth, paper, rubber, plastic, etc.—then you have a Class A fire. A fire blanket is a quick, easy way to extinguish the initial stage of a Class A fire. The fire blanket removes oxygen from the fire, which starves the fire of it’s ability to burn.
    • To use a fire blanket, remove from its packing, grip the unfolded blanket in front of you with your hands and body protected by it, and drape the blanket over the small fire. Do NOT throw the blanket at the fire.
  2. How.com.vn English: Step 2 Use a Class A fire extinguisher on the fire.
    If you do not have a fire blanket handy, then you can easily use a fire extinguisher on a Class A fire. Ensure that the label on the extinguisher reads Class A.
    • To use the extinguisher, aim at the base of the fire and sweep the spray back and forth across it until it’s out.[22]
    • If you cannot extinguish the fire within five seconds of using the extinguisher, then it’s too large.[23] Evacuate to a safe place and call 911.
    • Solely Class A extinguishers will be silver and will have a pressure gauge for the water inside; however, many multipurpose dry chemical extinguishers will also be rated for Class A fires.[24]
    • You can use a carbon dioxide (CO2) extinguisher on Class A fires if it’s the only type of extinguisher you have, but it’s not recommended. Class A objects tend to smolder for a long time, and the fire can very easily reignite as the CO2 dissipates.
  3. How.com.vn English: Step 3 Use plenty of water.
    A specifically Class A fire extinguisher is essentially water under pressure, so you can use large amounts of water from a sink if it’s the only thing you have available. If the fire is obviously spreading faster than you can douse it—or if it’s producing too much smoke for you to try safely—then you must evacuate the space and call 911 instead.
  4. How.com.vn English: Step 4 Call 911.
    As with any type of fire, you can to call 911 even if you manage to extinguish the fire. Emergency responders will ensure that the fire has no chance of reigniting.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What are the possible ways of extinguishing an electrical fire?
    How.com.vn English: Community Answer
    Community Answer
    Look for the nearest fire extinguisher. It should be classified by one or more of these classifications: "A" (wood, trash, paper), "B" (oil, gas), "C" (electrical), "D" (metals), and "K" (kitchen). Look for one that has a "C" on it. Use the acronym "PASS" to operate the fire extinguisher. (P)ull the pin, (A)im the hose or nozzle at the base (bottom) of the fire, (S)queeze the handles, (S)weep the hose side to side.
  • Question
    How do I put out a paper fire in a lab?
    How.com.vn English: Jay Tang
    Jay Tang
    Community Answer
    Normally, all science labs are equipped with fire-extinguishing equipment, like fire blankets and extinguishers. The extinguisher should be operated only by a qualified lab technician, as you may risk spreading a fire if you don't know what you're doing.
  • Question
    What are the three main ways to put out a fire?
    How.com.vn English: Community Answer
    Community Answer
    Remove the fuel (Starvation), the heat (Cooling), or the oxygen (Smothering).
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you use a fire blanket, make sure you leave the fire covered for at least fifteen minutes or until all of the heat has dissipated.
      • Familiarize yourself with the types of fire extinguishers you have in your home and office. The more quickly you can reach the correct extinguisher for the job, the better your chances of putting it out in its initial stage.
      • Familiarize yourself with the location of the breaker box in your home and office. In the event of an electrical fire, you want to be able to reach the box as quickly as possible to shut off the power source.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you suspect a gas leak, evacuate the space or if safe to do so switch the gas supply off and call 911 or your gas supplier's emergency line immediately. Don't use a mobile or cordless phone in the vicinity of the leak to do so! Also make sure to not switch on or off any electrical appliances. Ventilate the building if safe to do so by opening all doors and windows. However make sure to close them if the leak is external to the building. Natural gas is highly combustible and can fill a space quickly. If ignited, the fire will be explosive and never small enough to handle without the assistance of professional firefighters.
      • Smoke inhalation is extremely dangerous as well. If the fire has gotten to the stage where it’s producing lots of smoke, then evacuate and call 911.
      • This article represents a general guide for attempting to extinguish very small fires in their initial ignition stage. Use the information within at your own risk and exercise extreme caution any time fire is present.
      • Any time you cannot extinguish the fire within five seconds of using the extinguisher, then it’s too large.[25] The extinguisher will likely run out before you put out the fire. Evacuate to a safe place and call 911.
      • Your life comes first. Evacuate if the fire has spread and there is a low chance of extinguishing it by normal means and do not take the time to gather any belongings. Speed is essential.
      Advertisement

      Things You'll Need

      • Water (in the case of a Class A fire only)
      • Fire blanket
      • Clearly labeled and up-to-date fire extinguisher

      About This Article

      How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 39 people, some anonymous, worked to edit and improve it over time. This article has been viewed 594,121 times.
      44 votes - 82%
      Co-authors: 39
      Updated: February 4, 2024
      Views: 594,121
      Categories: Fire Emergencies
      Article SummaryX

      To extinguish an electrical fire, start by cutting off the electricity to the system that is sparking. Once you have done this, use water to put out the flames. If you are unable to switch off the electricity, never use water as this could make the fire spread and could get you electrocuted. Instead, use a class C extinguisher if you have one or evacuate the area if you don't. If the fire is liquid or fuel-based, turn off the fuel supply before smothering the flames with a fire blanket. When putting out an organic fire, use large amounts of water from a sink. To learn when you can use a fire blanket to put out an electrical fire, read on!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 594,121 times.

      Reader Success Stories

      • How.com.vn English: Misty Sanchez

        Misty Sanchez

        Mar 21, 2016

        "The electrical fire part helped me know what to do. A few years ago, I had an outside outlet catch fire and I..." more
      Share your story

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement