Download ArticleDownload Article
This article was co-authored by Kelly Medford and by How.com.vn staff writer, Jessica Gibson. Kelly Medford is an American painter based in Rome, Italy. She studied classical painting, drawing and printmaking both in the U.S. and in Italy. She works primarily en plein air on the streets of Rome, and also travels for private international collectors on commission. She founded Sketching Rome Tours in 2012 where she teaches sketchbook journaling to visitors of Rome. Kelly is a graduate of the Florence Academy of Art.
This article has been viewed 348,899 times.
Ever wanted to draw or design your own guitars? Follow these easy steps and learn how to draw the perfect guitar. Note: Follow the red lines for each step.
Steps
Download Article
Start off by drawing a horizontal egg shape for the body of your guitar.
Draw a long rectangle at the end of the egg shape for the fret board.Advertisement
At the start of the rectangle, inside the egg-shape, draw a circle.
Draw a small rectangle at the end of the fret board.
Now add the thickness of the body. This thickness will be determined by the shape you want the guitar. This tutorial will use the basic shape.
Add the details like the strings, the fret divisions, and the tuning knobs.
Ink the drawing and erase the sketch.
Color the drawing and you are done!
Draw two ovals. The one on the left should be larger than the one on the right, like a lopsided snowman.
Add two rectangles and one line to connect all the shapes. The upper rectangle will serve as the neck of the guitar, and the line is the beginning of a string.
Connect the ovals by adding two lines. Add small rectangles to give the guitar a boxier, more realistic shape.
Draw a small circle inside of the smaller upper oval. Add semicircles on the sides and tighten up your lines to make your guitar even more real-looking
Draw two wavy lines to indicate the shape of the guitar. (At this point you should really begin to see it start looking like a musical instrument; if it doesn't, go back and make sure you haven't distorted anything.) Erase excess lines as seen.
Draw six lines to render the strings of the guitar. Draw other details like the tuning pegs and frets on the neck.
Outline and color the drawing. Use shades of brown, unless your guitar is unusually colorful. Experiment with different shading and patterns to find out what looks the best.
Community Q&A
- QuestionHow do I slow down the steps?
Community AnswerYou can slow the video down on YouTube by clicking the Settings button, clicking 0.5 and it should be slower for you.
Tips
- Don't be afraid to experiment on the shape of the body and the end of the fret board.Thanks
- Remove the black from several parts, like the string and the frets so that they don't blend in too much.Thanks
- Keep studying and practicing, observing the guitar from different angles until you are able to replicate it in drawing form.Thanks
Tips from our Readers 
- Make sure the neck is straight. You can use a ruler or the straight edge of a sheet of paper as a guide.
- Don't be afraid that it will turn out wrong. Just keep practicing and your drawings will get better!
About This Article
To draw an acoustic guitar, start by sketching the shape of the guitar’s body. You can either start with a shape like an egg or a pear, or draw two circles side by side, with one being slightly bigger than the other. If you use the two circles method, draw curved lines on either side of the circles, connecting them together in the middle. Next, draw a long rectangle emerging out of the narrower end of the guitar. This will be the neck and fretboard. Make one end of the rectangle overlap with about the upper ¼ of the guitar’s body. Then, sketch in a circle just below the end of the fretboard where it overlaps with the body of the guitar. This circle represents the guitar’s sound hole. Make another, smaller rectangle at the opposite end of the fretboard to represent the headstock. This rectangle should be a little wider than the fretboard. Now it’s time to start filling in details. Add a second outline on one side of the guitar’s body to give it the appearance of thickness, and draw in details like the strings, tuning pegs, fret divisions, and pick guard. When you’re done, erase any unnecessary lines or rough parts of your sketch. If you want, ink your drawing and color it in, or add some shading to make it look more three-dimensional.
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
