Download ArticleDownload ArticleThis article was co-authored by Nikia Londy and by How.com.vn staff writer, Sophia Latorre. Nikia Londy is a Hair Augmentation Specialist and the Founder and CEO of Intriguing Hair, a one-stop solution for women from all ethnicities wanting to purchase high-quality human hair extensions, hairpieces, and wigs. With over 16 years of experience, she specializes in artificial hair integrations, hair extensions, hair loss, hairpieces and wigs, and non-surgical hair replacement. Nikia holds a BA in Organizational Leadership from Charter Oak State College and received her Cosmetology Certification from Blaine Beauty School. She is also a member of the American Hair Loss Council.
This article has been viewed 492,351 times.
Two-strand twists are a versatile hairstyle that can work on either short or long hair. The basic two-strand twists can be used as a base hairstyle for many different variations so that each hairdresser can give an individualized look. Children can also benefit from this easy-to-keep hairstyle since it can be dressed up with ribbons or beads. Follow the steps below to learn how to do two-strand twists with a professional look that can be another added hairstyle choice for your hair care routine.
Steps
Decide what kind of twist style you would like. You can divide the hair into large sections for less twists or do small random twists all over the scalp. The styles and options are almost endless, so choose the one you feel most comfortable with. No matter which option you choose, Hair Augmentation Specialist Nikia Londy emphasizes that no matter what you choose, this style "look[s] amazing on anybody! [It] also protects the hair and [is] low maintenance."
Shampoo and condition the hair. Give your hair a nice shampoo lather and rinse followed by a thorough conditioning. Once you have finished washing your hair begin drying by only removing excess water; It is very important to leave the hair a little damp.- A good idea will be to use a leave-in moisturizing conditioner.
- Try removing excess water by blotting or squeezing the hair gently with a cotton t-shirt. Do not rub your hair!
- Don't use a towel because it will dry your hair out. Also, it will make you hair frizzy and your curls can get tangled in the towel.
- If your hair has drops of water dripping off the ends it is still too wet and you should continue blotting.
Advertisement
Detangle the hair. Comb through the hair with a wide-tooth comb.- Start by combing the ends of the hair. Once those tangles are gone then slide up an inch or so and (still combing downwards) keep combing until all tangles (from the roots - down) are gone.
- Use detangling spray (i.e. Kinky Curly Knot Today) for a smoother comb through.
Part your hair into two sections. Use a rat-tail comb (a comb that has teeth on one end and a styling separator on the other) to part the hair horizontally from ear to ear.- Hold the top and bottom sections separate from each other by using hair clips for each section.
Audrey Davis-Sivasothy, Chemist and CosmetologistTwo-strand twists are stylish and protective for textured hair. The less manipulation, the better for length retention. Start with clean, detangled hair. Moisturize well with leave-in or a water-based product, sealing in moisture with oil or butter. Section hair, split into two strands and twist root to tip. Secure ends by twirling with extra product. Healthy twists come from balancing moisture, gentle handling, and regular conditioning. This style not only looks great but benefits your hair.
Divide the top and bottom parts into six even sections. These are the sections you will use to make your twists (Please note: This is example is only using six twists, however the procedure is the same for many).- To create three sections on the top part, part the hair running from the crown down to the horizontal part you previously made. Clip each section so they remain separated.
- To create three sections on the bottom part, part the hair running from the base of your scalp up to the horizontal part you previously made. Clip each section so they remain in place.
Remove the clip from the first (and eventually all) of the six sections of hair. This will be the only section that has been unclipped/not twisted and loose.- It may be easier to work from the bottom to the top so you do not take the chance of messing up the top twists.
Comb the loose section. Use the wide-tooth comb again to remove any tangles that might have been created in the separating and clipping process.
Apply hair lotion, curling cream, curling gel, or mousse. These styling products make the hair follicles sticky and will help to lock in the style.- Rub the product onto your hands and smooth it into the loose section of hair to be twisted.
Secure and separate the loose section. Use an elastic rubber band (optional) to hold the hair in place. Hair Augmentation Specialist Nikia Londy recommends that you then "separate the hair into two separate strands."- You do not need to use a rubber band if you prefer not to.
- Place the rubber band as close to the roots as possible while taking care to not pull the hair too tightly.
- Make sure the two separated sections are even.
Twist the two new sections of hair together. Hair Augmentation Specialist Nikia Londy instructs: "stretch out the hair and begin to twist them over each other until you reach the ends of your hair."- Allow the ends to curl on each other and apply a small amount of hair gel or cream to hold the twist in place. Apply a small amount of cream or gel to curl the end of the twist and hold it in place."
- Repeat the process for the remaining sections of hair.
Embellish with beads, barrettes, bows, or elastics with balls. The embellishments can be added to the ends or base of the twists.- Barrettes, bows and elastics are normally snapped/tied into place.
- Beads can be added by sliding them over the ends of the twists far enough up so they stick in place. It's best to secure the twist with a rubber band to keep the beads in place. Alternatively, you can find beads that clip onto your hair, which are specifically made for styles like the two strand twist.
Sleep with satin. Wear a satin scarf or sleep on a satin pillowcase to help your twist style stay intact.
Expert Q&A
- QuestionHow do I take a twist apart?
Ashley AdamsAshley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.
Professional Hair StylistThey are very easy to unravel. All you need to do is twist them in the opposite direction than you did when you styled your hair. For example, if you twisted them to the right when you made the twists, then you'll twist them to the left to loosen them. - QuestionShould I add beeswax onto my two strand twist? I've heard that you shouldn't because it's hard to get out, and I've heard that you can but don't use too much. What should I do?Ashley AdamsAshley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.
Professional Hair StylistYou can use beeswax on your two strand twist, but it's totally optional. If you do decide to use it, you should only apply a very small amount. When you want to remove it, you can easily wash it out by using a clarifying shampoo. - QuestionDo I have to wait for my two strands to dry before laying down in bed?
Community AnswerNo, but when you do go to bed, wear a satin bonnet or sleep on a silk pillowcase. Most people that want to take the twists out in the morning will wait for them to dry completely overnight.
Video
Tips
- Combing each section of hair with a boar-bristle brush will give a smoother, shinier twist.Thanks
- If the hair begins to dry while doing the two-strand twists in other sections, dampen with a water spray bottle.Thanks
- If a twist style begins to unravel or look frizzy, unravel the twists, separate into more sections, and re-twist.Thanks
Warnings
- If you use rubber bands to secure the base of the braids, be careful not to pull too tight. Hair loss may occur if the hair is pulled too tightly.Thanks
Things You'll Need
- Shampoo and conditioner
- Towel (optional)
- Detangler
- Wide-tooth comb
- Hair clips
- Hair styling gel
- Rat-tail comb
- Spray bottle
- Rubber bands
- Hair embellishments
About This Article
To do two-strand twists, start by dividing damp hair into 6 horizontal sections, starting at your forehead and ending at the base of your scalp, and securing each one with a clip. Then, remove the clip from the bottom section and apply hair lotion to lock in the style. Next, separate two small sections of hair and twist them together left over right. When you reach the end of the hair, apply gel to hold the twist in place before creating another twist next to it, all across the bottom section of hair. Finally, repeat this with each large section of hair, moving up towards your forehead. For tips on how to embellish the ends of your twists with beads or barrettes, read on!
Reader Success Stories
"I find it better to go slowly with the directions. Sometimes YouYube can go too fast. Thank you all."
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
