How to Determine Screening Constant and Effective Nuclear Charge

Download ArticleDownload Article

In many atoms, each electron is said to experience less than the actual nuclear charge because of shielding or screening by the other electrons. For each electron in an atom, Slater's rules provide a value for the screening constant, denoted by σ.

The effective nuclear charge may be defined as the actual nuclear charge (Z) minus the screening effect caused by the electrons intervening between the nucleus and valence electron.[1]

Effective nuclear charge, Z* = Z - σWhere, Z= Atomic number, σ = Shielding or screening constant.

To calculate the effective nuclear charge (Z*) we need the value of screening constant (σ) which can be calculated by using following rules.

  1. How.com.vn English: Step 1 Write down the...
    Write down the electronic configuration of the element as shown below.[2]
    • (1s) (2s, 2p) (3s, 3p) (3d) (4s, 4p) (4d) (4f) (5s, 5p) (5d)…
    • Fill the electrons according to Aufbau principle.
      • Any electrons to the right of the electron of interest do not contribute to shielding constant.
      • The shielding constant for each group is formed as the sum of the following contributions:
        • Each other electron in the same group as the electron of interest shield to an extent of 0.35 nuclear charge units except 1s group, in which the other electron contributes only 0.30.
        • If the group (n) is of [s, p] type, an amount of 0.85 from each electron in (n-1)th shell and an amount of 1.00 for each electron from (n-2) and lower shells is added to the shielding constant.
        • If the group is of [d] or [f] type, an amount of 1.00 for each electron from all lying left to that orbital.
  2. How.com.vn English: Step 2  For example:
    (a) Calculate effective nuclear charge in Nitrogen for 2p electron.[3]
    • Electronic configuration- (1s2) (2s2, 2p3).
    • Screening constant, σ = (0.35 × 4) + (0.85 × 2) = 3.10
    • Effective nuclear charge, Z* = Z – σ = 7 – 3.10 = 3.90
    Advertisement
  3. How.com.vn English: Step 3 (b)   Calculate effective nuclear charge and screening constant seen in 3p electron in Silicon.
    [4]
    • Electronic configuration- (1s2) (2s2, 2p6)(3s2, 3p2).
    • σ = (0.35 × 3) + (0.85 × 8) + (1 × 2) = 9.85
    • Z* = Z – σ = 14 – 9.85 = 4.15
  4. How.com.vn English: Step 4 (c)   Calculate effective nuclear charge in Zinc for 4s electron & for 3d electron.
    [5]
    • Electronic configuration- (1s2) (2s2, 2p6)(3s2, 3p6)(3d10)(4s2).
    • For 4s electron,
    • σ = (0.35 × 1) + (0.85 × 18) + (1 × 10) = 25.65
    • Z* = Z – σ = 30 – 25.65 = 4.35
    • For 3d electron,
    • σ = (0.35 × 9) + (1 × 18) = 21.15
    • Z* = Z – σ = 30 – 21.15 = 8.85
  5. How.com.vn English: Step 5 (d)   Calculate effective nuclear charge on one of 6s electron in tungsten.
    (At. No. =74)
    • Electronic configuration- (1s2) (2s2, 2p6)(3s2, 3p6)(4s2, 4p6) (3d10) (4f14) (5s2, 5p6)(5d4), (6s2)
    • σ = (0.35 × 1) + (0.85 × 12) + (1 × 60) = 70.55
    • Z* = Z – σ = 74 – 70.55 =3.45
  6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I determine the effective nuclear charge for 2p in sodium?
    How.com.vn English: Community Answer
    Community Answer
    The effective nuclear charge for any subshell is the total positive charge of the nucleus minus the total negative charge of the previous subshells. Ffor example, the effective nuclear charge on the 2p orbital in sodium would be 7, because the total nuclear charge is 11, but the 4 electrons in the 1s and 2s orbitals screen 4 lead to an effective nuclear charge of 7.
  • Question
    Is effective nuclear charge the same for all of the electrons present in an atom?
    How.com.vn English: Community Answer
    Community Answer
    No. The inner electrons have less shielding while the outer electrons have more shielding, and hence the effective nuclear charge differs from orbit to orbit. However, all electrons in the same orbit have the same effective nuclear charge.
  • Question
    What is screening constant of the 4s electron of potassium?
    How.com.vn English: Community Answer
    Community Answer
    Atomic number = 19. Screening effect of 4s = 0×0.35+8×0.85+10×1 = 0+6.8+10= 16.8. As 4s electron has only 1 electron, so 0×0.35. Then 3s3p has 8 electrons, so 8×0.85. 1s 2s2p has 10 electrons, so 10×1. Now these three are added.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Read about shielding effect, screening constant, effective nuclear charge, Slater's rule, etc.
      • If there is only one electron in an orbit there will be no screening effect taking place. Again, if the number of electrons present is an odd number, then subtract one to obtain the actual quantity to be multiplied to get the screening effect.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Though these rules may appear confusing, writing the proper electronic configuration will help ensure success.
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about chemistry, check out our in-depth interview with Anne Schmidt.

      About This Article

      How.com.vn English: Anne Schmidt
      Co-authored by:
      Chemistry Instructor
      This article was co-authored by Anne Schmidt. Anne Schmidt is a Chemistry Instructor in Wisconsin. Anne has been teaching high school chemistry for over 20 years and is passionate about providing accessible and educational chemistry content. She has over 9,000 subscribers to her educational chemistry YouTube channel. She has presented at the American Association of Chemistry Teachers (AATC) and was an Adjunct General Chemistry Instructor at Northeast Wisconsin Technical College. Anne was published in the Journal of Chemical Education as a Co-Author, has an article in ChemEdX, and has presented twice and was published with the AACT. Anne has a BS in Chemistry from the University of Wisconsin, Oshkosh, and an MA in Secondary Education and Teaching from Viterbo University. This article has been viewed 330,224 times.
      11 votes - 71%
      Co-authors: 20
      Updated: October 4, 2023
      Views: 330,224
      Categories: Chemistry
      Thanks to all authors for creating a page that has been read 330,224 times.

      Reader Success Stories

      • How.com.vn English: Izek Banda

        Izek Banda

        Nov 3, 2016

        "It has helped me know how treat the F and D orbitals when finding the shielding constant, which has been a little..." more
      Share your story

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement