How to Cut Wire

With the right tool and cutting technique, you can easily cut wire of all shapes and sizes. For instance, use Lineman’s pliers to cut electrical wires, or use diagonal cutting pliers for an all-purpose choice. Make sure you put on safety glasses to prevent flyaway wires. Align the wire with the cutting part of your tool, and push down with gentle but firm pressure to make your cut.

Part 1

Part 1 of 3:

Choosing a Cutting Tool

Download Article

1
Use Lineman’s pliers to splice or cut electrical wires. Lineman’s pliers have their cutting device on the side, and they are used for many different construction and electrical jobs. If you need to grip, strip, or cut any sort of electrical wire, this is the safest choice.^{[1]XResearch source}
- Lineman’s pliers are also known as “side cutting” pliers.
2
Select long-nose pliers if you are cutting a small-gauged wire. Long-nose pliers have a slim, pointed end, and the ends of the pliers may be either straight or bent. These are often used to reach small wires or get into awkward places. Use these if you are cutting 8- to 24- gauge wire.^{[2]XResearch source}
- Since they have a narrow tip, long-nose pliers also work great to bend loops into wires and attach multiple wires together.
- If you are cutting wire for a jewelry project or trimming guitar strings, this may be a good option.
Advertisement
3
Go with diagonal cutting pliers for a standard, all-purpose option. If you don’t have many tools but need a basic wire-cutter, this is the tool for you.^{[3]XExpert SourceRyaan Tuttle
Home Improvement SpecialistExpert Interview. 30 July 2021.} Diagonal cutting pliers have a sharp, rounded tip, making them great for stripping and cutting wire. You can use these for nearly any type of wire.^{[4]XResearch source}
- Diagonal cutting pliers are also widely used for removing pins and nails as well.
- If you want to cut a wire hanger, for example, this is a good option.
- Diagonal pliers are also called "dikes."^{[5]XExpert SourceRyaan Tuttle
  Home Improvement SpecialistExpert Interview. 30 July 2021.}
4
Try end-cutting pliers if you want to make a close cut. End-cutting pliers have a short, stunted tip, which works great for trimming wire without taking much off the end. These work great for projects where you don’t have much wire left over or if you need to splice 2 wires close together.^{[6]XResearch source}
- You can also use end-cutting pliers to cut nails and rivets.
5
Avoid using scissors to cut wire. It is best to use a wire cutter or plier hand tool rather than using scissors or a blade. Even a sharp pair of scissors may not cut through wire without damaging the internal metal.^{[7]XResearch source}
- It is also easy to slip and cut yourself when cutting wire with a pair of scissors, since the blade may not grip the wire as well as a set of pliers.

Part 2

Part 2 of 3:

Setting up the Workspace

Download Article

1
Wear safety glasses to protect against flyaway pieces. While you are snipping and stripping wire, pieces of the coating or the wire can fly up and pierce your eye. To prevent this, always put on safety glasses or goggles to cover your eyes.^{[8]XResearch source}
- If you'd like, you can also wear protective gloves to prevent poking your fingers with the wires. While this is not required, it can be helpful if cutting lots of wire at the same time.
2
Put your wire on a flat work surface so you can stand comfortably. Place the object you are working with on a table or countertop. You want to stand comfortably without having to bend forward or backward when you make your cuts. This way, you have less chance of injuring yourself.^{[9]XResearch source}
- If you are leaning forward or backward and happen to lose your balance, you have a greater chance of hurting yourself with your tool or hitting your head.
3
Shut down the power source if you have one before snipping any wires. If you are cutting electrical wires, audio wires, or computer wires, be sure to power down your device before you get started. If your device is still on, you could get shocked as you make your snips, or your wires can get damaged.^{[10]XResearch source}
- For instance, if you are cutting the wires in your computer, make sure the computer is powered off before you begin.
4
Unravel the wire from the spool if cutting new wire. If you are cutting a fresh piece of jewelry wire, barbed wire, or electrical wire, for example, find the end of the wire and pull it off of the spool to your desired length.^{[11]XResearch source}
- This way, you can have a smaller piece of wire to size and shape as needed.

Part 3

Part 3 of 3:

Making Cuts

Download Article

1
Ensure your tools are clean, sharp, and in good condition. If the blade of your tool is dull or if there is a lot of rust, the tool may not cut the wire correctly. Also, wipe down your tool with a clean cloth before you get started. If your pliers or wire cutters are dirty before you use them, this can cause you to slip up as you make the cut. If your tools are not in proper working condition, do not use them.^{[12]XResearch source}
- Additionally, apply a drop of oil to your tool every 1-3 weeks to keep them in good condition. The oil makes the hinge work better over time.
2
Grip the handles of your tool properly and securely. Hold the pliers in your dominant hand so your thumb sits on top of one end of the handle and your other fingers fit around the other end. This helps you control the tool when making your snips.^{[13]XResearch source}
- If you hold the tool incorrectly, you can slip when you make your cut, injuring yourself or damaging the wire.
3
Bring the tool to your wire where you want to make your cut. Open the handle of your tool all of the way, and place your wire at the inner snipping section of your pliers or cutters. Place the wire in your tool so the spot you want to snip is exactly centered with the tip of your tool.^{[14]XResearch source}
- The inner snipping section is slightly different depending on your tool. For instance, diagonal cutting pliers will have a diagonally-shaped blade.
4
Make your cut at a right angle so you don’t damage the wire. For a clean, even cut, position your tool at a right angle after you bring the tool to the wire. This way, the blade of your plier or wire cutter can easily make a clean cut.^{[15]XResearch source}
- If you do not cut the wire at a right angle, you may damage the wire and it may not work any longer.
5
Apply force gently onto the handles to snip the wire. When you cut wire, it’s best to slowly and gradually make your cut. Squeeze both sides of the handle together gradually so you do not use too much force. As you do this, avoid rocking your tool from side to side or bending the wire.^{[16]XResearch source}
- If you cut the wire too forcefully, the tail of the wire may fly up into the air.
- If the wire does not cut entirely with 1 snip, open the handle of your tool and make another cut at a right angle.

Expert Q&A

Search

Add New Question

Question
How do you cut wires without a wire cutter?
Ryaan Tuttle
Home Improvement Specialist
Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with How.com.vn and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
Ryaan Tuttle
Home Improvement Specialist
Expert Answer
Use a cordless bandsaw or a metal grinder with a metal cutting blade in it.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 2
Question
Tool to be used in cutting wire?
Garrie Nassau
Community Answer
The best options to cut wire are pliers and wire cutters.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0
Question
Why can’t we use scissors for cutting a wire?
Garrie Nassau
Community Answer
For safety reasons, it is best to use a wire cutter or pliers hand tool to cut the wire. If you use scissors, they often cannot cut through wire correctly and you can damage the internal conductor or cause injury to yourself.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 3