How to Crochet a Halter Top

Crocheting your own halter top is a fun way to make your own clothing while getting crafty. This halter top has an open back that's tied together with crisscross straps, while the front covers your chest and comes up to your neck. To make the halter top, all you'll need is a crochet hook and some yarn in a color of your choice. Hold your halter top up to your body as you're making it to be sure it's the right size. With a couple hours of free time and some simple crochet stitches, you'll be wearing your crocheted halter top in style.

Part 1

Part 1 of 4:

Measuring for the Halter Top

Download Article

1
Form a slip knot on your crochet hook. Loop the yarn around your finger so it creates a full circle. Push the loose end of the thread through the loop and pull on the loop to create the slip knot.^{[1]XResearch source}
- You can easily make this loop bigger or smaller by pulling on the yarn.
- Use a 5mm hook and yarn that’s a size 4 for the best results.
Use a chain stitch to make a chain long enough to wrap around your body from one side of your ribs to the other. The chain doesn’t need to wrap around your entire body because the back of the top will be open.^{[2]XResearch source}
Advertisement
3
Hold the chain up to your body to measure it every 10 chain stitches or so. Once you think you’re getting close to having the right number of chain stitches, hold the chain up against your body to see how far it wraps around. Keep adding 5-10 chain stitches at a time to be sure you add just the right amount.^{[3]XResearch source}
- It’s best to place the chain stitches against the widest part of your ribs.
- If you'd rather use a measuring tape to measure your body, hold the measuring tape so it's going from one rib to the other and create enough chain stitches to reach this length.
4
Stop the chain when it reaches from one side of your ribs to the other. Once your chain reaches from the back of one rib to the back of another, it’s long enough. This is the base for your halter top. The number of chain stitches that you’ll need for your halter top will depend on your size.^{[4]XResearch source}
- For example, one person might need 78 chains to reach across their body while another person might need 102.

Part 2

Part 2 of 4:

Creating the Top’s Length

Download Article

1
Make double crochet stitches along the entire chain you formed. Create double crochet stitches by yarning over, sticking your crochet hook through the stitch, yarning over again, and going back through the stitch. Yarn over, reach the hook through the 2 loops, yarn over one last time, and go through the last 2 loops to complete the double crochet stitch. Create double crochet stitches going along the entire row.^{[5]XResearch source}
- Keep making double crochet stitches until you get to the end of the row.
Once you get to the end of your row, add 2 chains using a regular chain stitch, just like you did at the very beginning. Flip your crochet work over so that you’re ready to start working on the next row.^{[6]XResearch source}
3
Crochet along the new row with the same double crochet stitch. Do the same thing you did with the previous row, creating double crochet stitches along the entire row until you reach the other end. Pay close attention to your hook movements to make sure you’re going through the top chains on the row.^{[7]XResearch source}
- The last row of double crochet stitches will have left you 2 stitches on the top, so make sure your hook goes through both stitches.
4
Continue creating rows until you like the length of your halter top. The area that you’re currently crocheting is the rectangular section that will be underneath your chest. Add rows until you’re pleased with how long it is and hold the piece up to your body to see how it’s coming along.^{[8]XResearch source}
- Don’t forget to add 2 chain stitches before starting each new row.
- If you want a crop halter top, you might only make 5 rows, while a longer halter top might need 9 rows.

Part 3

Part 3 of 4:

Forming the Halter Shape

Download Article

While before you would add two chain stitches before you crocheted each row, now you’ll only add one. This will help create the triangle shape of the halter top.^{[9]XResearch source}
2
Skip the second stitch on the row when you make the double crochet stitches. Put your hook through the first stitch and make a double crochet stitch, but skip the second stitch on the row. Continue making the double crochet stitch on the third stitch instead.^{[10]XResearch source}
- Skipping the second stitch when you start each row is what will shape your halter top into a triangle, slowly removing length.
Keep creating double crochet stitches as you normally would along the entire row. You don’t need to skip any more stitches on this row.^{[11]XResearch source}
Once you get to the end of the row, make one chain stitch. Flip your work over so that you’re ready to start the next row.^{[12]XResearch source}
Just like you did in the last row, create a double crochet stitch with the first stitch, skip the second stitch, and go into the third stitch with a double crochet stitch too. Continue with double crochet stitches along the entire row until you get to the end.^{[13]XResearch source}
6
Keep repeating this pattern until you like the size of your halter top. Continue with this same pattern: adding a chain stitch to your new row and skipping the second stitch as you go along the row making double crochet stitches. Hold your halter top up to your body to decide when the length is right and your triangle portion is finished.^{[14]XResearch source}
- It might take several rows before you notice your halter top forming a triangle.

Part 4

Part 4 of 4:

Making the Straps

Download Article

1
Make a long chain with the loose yarn for the first strap. With the loose yarn that’s at the top of your halter top from where you stopped crocheting, start making regular chain stitches. Create enough chain stitches to form a chain long enough to weave through the back of the halter top and tie to form a strap.^{[15]XResearch source}
- This will likely be at least 150 chain stitches.
Make a slip stitch by putting your hook through the chain, yarning over, sliding the hook back through the chain, and then going back through the loop. Go along the chain you created for your strap and add a slip stitch to it so your straps are thicker and more durable.^{[16]XResearch source}
3
Cut the yarn and reattach it on the other side to make an easy second strap. The easiest way to make the second strap is to tie off the end to your first strap that you just finished and cut the yarn. Retie the yarn to the other side of your halter top so it’s ready to form chain stitches.^{[17]XResearch source}
- Tie the yarn to the other side of the halter top securely to make sure the second strap doesn’t come undone.
4
Use single crochet stitches along the edge for a detailed second strap. This method for the second strap takes much longer but will give your halter top a crisper finish. Add a single crochet stitch along the edge of your halter top, going down from your first strap along the bottom of the top and then up its other side to where the second strap will go.^{[18]XResearch source}
- This method eliminates the need for you to cut the yarn and reattach it to the other side.
- Using a single crochet stitch along the edge of your halter top gives it a nicer look.
Start the second halter top strap by creating a long line of chain stitches, just like you did with the first strap. Compare your second strap with the first strap as you make the chains to be sure they’re the same length. Go along the chain using a slip stitch to add the extra thickness to the strap.^{[19]XResearch source}
When the halter top is flipped over, the straps should be at the top and the back of your halter top should be open. This is where you’ll attach the straps.^{[20]XResearch source}
7
Weave the straps through the top to form a crisscross pattern. Take the strap on the left and weave it through the right side of the halter top, then the left side, and finally back to the bottom right, similar to if you were lacing shoes. Take the right strap and do the same thing, but in the opposite direction, so that you’re left with a crisscross pattern. Both of the straps should be at the bottom of the halter top where you can tie it together.^{[21]XResearch source}
- Try to lace the straps through the halter top as evenly as possible so that each side matches up.
- Put on your halter top, tie the straps, and you’re ready to go!

Community Q&A

Search

Add New Question

Question
How can I do a double crochet?
Lily
Community Answer
Start by reading this article. Basically then, you yarn over, insert, pull through one, pull through two, pull through two.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 1

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Things You'll Need

5mm hook
Yarn (size 4)
Scissors (optional)
Measuring tape (optional)

Tips

If you're making the halter top for someone else, have them send you their measurements so the top will fit correctly.
Thanks
Helpful2 Not Helpful0
Remember to hold your halter top up to your body as you're creating it to ensure it's the right size.
Thanks
Helpful2 Not Helpful0
If you're new to crocheting, test out the stitches you'll need on a separate project before starting the halter top.
Thanks
Helpful2 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Make sure you have enough yarn for your project before you start so you don't run out before you're finished. It's best to start with a brand new ball, if possible.
Thanks
Helpful3 Not Helpful0