How to Create a Battery from a Lemon

Batteries are an essential part of everyday life. They allow you to carry electronic devices on the go without having to plug them into a wall outlet. A battery is able to generate electricity by passing electrons between two different metals (one positively charged and one negatively charged). The electrons create a current as they pass through a solution containing molecules that carry the charged particles back and forth between the two different metals.^{[1]XResearch source} With a few simple steps, you can create a very simple battery using two different metals and a lemon.

Method 1

Method 1 of 2:

Making a Single Lemon Battery

Download Article

1
Gather your materials. To make a lemon battery you will need a copper penny, a galvanized nail, a lemon (10 total), a knife, and a voltmeter. Adult supervision is recommended, especially while handling the knife. Rinse the penny with a light detergent to ensure you are working with a clean surface.^{[2]XResearch source} Any lemon will do, but a lemon with a thinner rind will make a better battery.
- If you have one, a strip of copper will work better than just a penny.
- Galvanized nails have a zinc coating that is important to this experiment.^{[3]XResearch source} They can be found in any standard hardware or home improvement store.
- Aluminum foil can be substituted for the nail if you don’t have one.
- A voltmeter can be purchased at a hardware or home improvement store.
2
Squeeze the lemon without breaking its skin. You can roll the lemon on a table applying a small amount of downward pressure. The squeezing action releases the juices inside the lemon needed for the battery to work.
- The acidity of the juice in a lemon makes it ideal for this sort of chemical reaction. It contains the solution of molecules necessary to carry electric current between the two metal ends of a battery.^{[4]XResearch source}
Advertisement
The slit needs to be large enough to insert the copper penny about halfway into the lemon. Adult supervision is recommended for this step. You want the penny to stay firmly in place so don’t cut the slit too large.^{[5]XResearch source}
4
Insert the penny and the nail into the lemon. The penny should fit nicely into the slit you’ve already made. The nail should be pushed into the lemon about 2 centimeters away from the penny. These items will serve as the positive and negative ends of your battery.
- The metals need to be close to each other in order for the necessary chemical reaction to take place.^{[6]XResearch source}
- Be careful not to have the nail and penny touch within each lemon. If they touch, the battery will short circuit and you won’t get any voltage.
- Make sure the penny and the nail are deep enough to be in contact with the juice of the lemon.
5
Attach the voltmeter clips to the nail and penny. Using the end clips of the voltmeter, attach one clip to the nail and the other clip to the penny. You should see a small increase in voltage on the voltmeter. If the voltmeter is reading a negative value, simply switch the clips on the nail and penny and it should change to a positive voltage.
- If the voltage is very low, try moving the nail closer to the penny.
EXPERT TIP
Jessie Antonellis-John
Math and Science Instructor
Jessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications.
Jessie Antonellis-John
Math and Science Instructor
First, teach basic facts then let students test ideas before step-by-step instructions. For projects like making a battery from a lemon, let students play around first before giving step-by-step instructions. Teach them basic facts about how electricity flows, then let them test ideas. Learning by trying things out gives a deeper understanding than just following directions.

Method 2

Method 2 of 2:

Making a Multi-Cell Lemon Battery

Download Article

1
Gather your tools. A multi-cell battery is when you connect multiple batteries together. In this case, you will link multiple lemon batteries together. To make a multi-cell lemon battery you will need four copper pennies, four galvanized nails, four lemons, a knife, 15 inches of copper wire, wire cutters, a ruler, and a voltmeter. Any lemon will do, but a lemon with a thinner rind will make a better battery.
- Adult supervision is strongly recommended, particularly when using the knife.
- Clean the penny with a light detergent to maintain a clean working surface.^{[7]XResearch source}
- If you have one, a lobster claw will do.
- Galvanized nails have a zinc coating that is important to this experiment^{[8]XResearch source} and can be found at a local hardware or home improvement store.
- Aluminum foil can be substituted for the nail if you don’t have one.
- You can link as many lemons together as you’d like to increase the voltage.
2
Squeeze the lemons without breaking their skin. Gently roll each lemon across a tabletop, applying a small amount of downward pressure. Squeezing the lemons in this way releases the juices inside the lemon needed for the battery to work.
- The acidity of the juice in a lemon makes it ideal for this sort of chemical reaction. The molecules in the juice will carry the electric current between the two metal ends of the battery.^{[9]XResearch source}
Adult supervision is recommended for this step. Measure out 3-inch pieces of wire and snip them using the wire cutters. They don’t have to be exactly 3 inches, you just need enough wire to wrap around a penny and a nail.
4
Connect a penny and a nail with one piece of wire. You are going to make copper-wrapped nail and penny pairs. Take a bit of wire and wrap it a few times around the penny and then take the other end and wrap it around the top of the nail. The penny and nail will be inserted into separate lemons so be sure to leave enough space (about 1.5 inches) between them.^{[10]XResearch source}
- Ensure the wire is wrapped tightly around each piece. The battery will not function as well without proper contact between each connection.
- You should have three penny and nail pairs when you are finished.
5
Wrap a piece of wire around just one penny and one nail. The battery will begin with a single copper-wrapped penny and end with a single copper-wrapped nail. Just as you did before, take a piece of wire and wrap it a few times around a penny. Using a separate piece of wire, wrap that a few times around the top of the nail.^{[11]XResearch source}
- Again, wrap the wire tightly around each piece to make good connections.
The slit should be large enough to insert the copper penny about halfway into the lemon. Adult supervision is recommended for this step. The penny needs to stay firmly in place so make sure the slit isn’t too large.^{[12]XResearch source}
7
Insert the single copper-wrapped penny and nail into the first and last lemons, respectively. Line up all four of your lemons and choose one to be the first and one to be the last. Stick the copper-wrapped penny into the slit you cut into the top of the first lemon in the chain. Insert the copper-wrapped nail into the last lemon in the chain.
- It is not super important that all of your lemons stay lined up as long as the single penny and nail are stuck into separate lemons.
8
Insert the copper-wrapped penny and nail pairs into separate lemons. Each lemon will ultimately have one penny and one nail sticking out of it. The first lemon in the chain will already have a penny, so stick the nail end of a pair into the first lemon. The second lemon will get the penny from that pair. The second lemon will also get the nail from the second pair of copper-wrapped pennies and nails.^{[13]XResearch source}
- Continue alternating between pennies and nails until you reach the last lemon which will already have a single copper-wrapped nail.
- Be careful not to have the nail and penny touch within each lemon. If they touch, the battery will short and you won’t get any voltage.
9
Attach the voltmeter clips to the free end wires. Using the end clips of the voltmeter, attach one clip to the copper wire attached to the nail and the other clip to the copper wire attached to the penny. You should see an increase in the voltage reading on the voltmeter. If the voltmeter is reading a negative value, simply switch the clips between the nail and the penny and it should change to a positive voltage.
- If the voltage is very low, try moving the nails closer to the pennies in each lemon and make sure all of the wires are in contact with each penny and nail.

Expert Q&A

Search

Add New Question

Question
What's your advice for students attempting the lemon battery experiment?
Jessie Antonellis-John
Math and Science Instructor
Jessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications.
Jessie Antonellis-John
Math and Science Instructor
Expert Answer
I'd say let the students play around with it first without too many step-by-step instructions. While some background on electricity flow is helpful, it's also great to just let them explore on their own. This not only gets them to better understand the process, but also builds curiosity and deeper learning. Encourage them to not just blindly follow directions, but to dig into the science behind why it works. Guide them but also foster that genuine curiosity to figure out the principles behind making a battery from lemons. Hands-on exploration is key for science experiments like this.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 3
Question
Will this work with oranges?
Community Answer
Yes, as they also contain citric acid.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 30 Helpful 107
Question
Can I use one lemon to make a lemon battery?
Community Answer
Yes, but you will have to follow the steps in the pictures and words as long as the circuit is complete.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 42 Helpful 74

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Always be careful when working with electricity.
Thanks
Helpful71 Not Helpful21
Power in a single cell isn't strong. You will require several linked together to light a light bulb (two or more cells make a battery).
Thanks
Helpful22 Not Helpful7

Things You'll Need

Galvanized nail (zinc metal)
Penny (small copper coin)
One lemon (if you need more voltage to light an LED bulb for example you need at least 4 lemons)
Scissors or knife
Voltmeter (optional)