Download ArticleDownload ArticleHow.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 380,742 times.
Learn more...
Ready to tell some spooky campfire stories in the woods during your next camping adventure? Make the evening a little less scary by creating glow-in-the-dark log campfire stools. You don’t even need real logs to create these stools, just seating that can be transformed into chairs that glow in the night.
Steps
- 1Shop for the supplies. A list of what you need is provided by scrolling to the end of this article, under Things You'll Need. In terms of the stool, this could be wood or plastic but check that the glow-in-the-dark paint is suitable for the surface.
- For a bit of fun, this article sidestepped human-made stools and chose a tree stump instead. If you use a tree stump, check that it is clean, as in next step.
Prepare the stools for painting. Whether you need to clean, sand or simply dust off the stool, make sure the stool is prepped and ready to receive a few coats of paint.[1]- Sand down any sharp parts if using wood, or remove old screws, etc., that might be sticking out.
Advertisement- Sand down any sharp parts if using wood, or remove old screws, etc., that might be sticking out.
Cover the area where you'll be painting. This will avoid staining the ground or work surface.[2]
Add the first coat of paint according to the manufacturer's instructions.[4]
Allow for enough time to dry. Depending on where you paint the stool, (heat or humidity add on to dry time), this could take up to 24 hours. Again, read the manufacturer's suggestions before assuming it's dry.
Evaluate the paint job to see if the stool is adequately covered. If necessary, add a second coat of paint. The color should really pop, so add another coat of paint if it doesn’t have a vibrant appearance from the first coat.
Place the stools in the room or outdoor area where they'll be useful for sitting.
Leave a bright light focused on the stools for a time. If this is outdoors, use a spotlight or use lamps with extension cords (tape down any cords that cross walking areas, to avoid tripping). Then turn off the light and the stools should glow.[5]- Follow the manufacturer's instructions for any deviation from this method.
- Follow the manufacturer's instructions for any deviation from this method.
Community Q&A
- QuestionWhere I can find the glow-in-the-dark paint?
Community AnswerFrom craft stores, hardware stores and paint stores. You can probably also search for it online via paint retailers and through auction/trade sites. - QuestionIs there a glow in the dark paint that works only with direct sunlight, not UV lighting?
Community AnswerYes, but the colors might not appear the same. You can find the paint on Amazon. - QuestionI bought some of the glow-in-the-dark paint and it did not work at all.Community AnswerReturn the paint to the retailer and explain that it failed to glow. However, before doing so, ensure that you have followed the instructions on the paint can completely.
Tips
- Unfinished, unpainted wood stools can be picked up from a “naked” furniture store––both cost effective and perfect for painting.Thanks
- Check the ability of the paints you use to adhere to the surface you're painting. In some cases, you may need to rough up the surface a little.Thanks
- Choose seating for every member of the family. Don’t forget about the kids––seating that is “their size” is fun and makes them feel included.Thanks
Things You'll Need
- Stools - permanent or portable (even log stumps can work)
- Sandpaper
- Cleaning gear (if needed, for stool)
- Groundsheet or other floor covering
- Glow-in-the-dark (luminous or luminescent paint) paint (in favorite colors, or even different colors for each person to be able to identify their own)
- Paintbrushes
- Design templates/stencils (if needed)
- Bright light
References
About This Article
Before you create glow-in-the-dark stools, gather supplies, including paintbrushes and glow-in-the-dark paint. After you have sanded your stool, apply your glow-in-the-dark paint by following the directions on your paint. If you'd like, try using stencils to paint designs, like family member's names or butterflies, instead of painting the entire stool. After your stools have dried, shine a light on them for a few hours to ensure they will glow in the dark. For more details about converting a tree stump into a glow-in-the-dark stool, scroll down!
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
