Download ArticleDownload ArticleThis article was co-authored by How.com.vn staff writer, Travis Boylls. Travis Boylls is a Technology Writer and Editor for How.com.vn. Travis has experience writing technology-related articles, providing software customer service, and in graphic design. He specializes in Windows, macOS, Android, iOS, and Linux platforms. He studied graphic design at Pikes Peak Community College.
This article has been viewed 143,329 times.
Learn more...
UConnect is an infotainment system used it car manufactured by Fiat-Chrysler Automobiles. It controls your cars audio, and navigation features, as well as allows you to connect to your smartphone. This How.com.vn teaches you how to connect to your UConnect system.
Steps
Tap the phone icon on the UConnect screen. It's in the lower-right corner of the UConnect system in the center of your dashboard console.
Tap Yes when prompted. A prompt will appear on the UConnect screen asking if you would like to pair your phone. Tap Yes. A PIN will be displayed on the screen.- Alternatively, if your system has voice commands, you can say "Setup" followed by "Pair a phone". You will then be asked to confirm the four-digit PIN for your vehicles UConnect system. Refer to vehicle's user manual to obtain the default 4-digit pin.
Advertisement
Open the Bluetoothsettings on your smartphone. Use the following steps to open the Bluetooth settings on your smartphone.
- iPhone:
- Open the Settings app
- Tap Bluetooth.
- Android:
- Swipe down from the top of the screen with two fingers.
- Tap and hold the Bluetooth icon.
- iPhone:
Turn Bluetooth on. To turn on Bluetooth, tap the toggle switch at the top of the Bluetooth settings menu on your phone.
Tap "UConnect" in the list of Bluetooth devices. The Bluetooth menu on your phone will scan and display a list of nearby Bluetooth devices. Tap UConnect when it appears in the list of devices.
Tap Pair on your smartphone. Make sure the PIN that displays on the UConnect screen matches the number on your phone and tap Pair.
Tap Yes on the UConnect screen. It will start the Bluetooth pairing process with your phone.
Tap Yes or No to make this smartphone the favored device. If you are the primary driver, tap Yes to make your phone the favorite for the system. If you are not the primary driver, tap No to deprioritize your phone.[1]- Some UConnect systems allow you to assign a priority for your phone by asking you to choose a number between one and seven while pairing your phone. One is the highest priority.[2]
- Press the green phone icon on your steering wheel to display a list of phone-related voice commands on the screen. Use the voice commands to make and receive calls.
- If you are using an iPhone, you can also use Siri voice commands.
- In addition to connecting with Bluetooth, you can also connect your phone using a USB charging cable.
- Tap Media on the UConnect screen to access music and media on your phone while it is connected.
Verify the UConnect system is listed as a trusted device on your phone. If your phone won’t reconnect to UConnect, check to make sure it is listed as a trusted device in the Bluetooth Settings menu on your Phone. These Bluetooth settings can prevent UConnect from repairing with your phone after the first pairing.
Restart your phone. Press and hold the power button on your phone and then tap the button to power your phone off. If your phone has a removable battery, remove the battery and replace it. Then press the power button to restart your phone.
Remove UConnect from your list of paired device and pair it with your phone again. To remove UConnect from your list of paired devices, open the Bluetooth menu on your smartphone and tap the gear icon or icon with an "i" next to UConnect. Then tap Unpair or Forget this device. Then use the steps in Method 1 to pair your phone with the UConnect console again.
Contact your car dealer for further assistance. If you are unable to get your phone to connect to UConnect, contact your auto dealer.
Expert Q&A
Tips
References
About This Article
1. Tap the Phone icon on the UConnect screen.
2. Tap Yes when ask to pair a phone.
3. Open the Bluetooth settings on your phone.
4. Turn on Bluetooth and tap UConnect in the list of deivces.
5. Tap Pair on your phone.
6. Tap Yes on the UConnect screen.
7. Tap Yes to prioritize your phone.
Is this article up to date?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
