How to Coil Any Kind of Cord

Download ArticleDownload Article

Prevent kinks and create neat order out of ropes, lines, extension cords, etc. by coiling them after use.

  1. How.com.vn English: Step 1 Make sure that the medium you are coiling is clean and ready to be put away.
  2. How.com.vn English: Step 2 Your dominant hand will be the coiling hand, your non-dominant hand will just hold the coil.
    Take one end of the cord or rope into your non-dominant hand. Have the end fall about an inch out of your hand either towards you or away from you. This will determine whether the line will be coiled clockwise or counter-clockwise.
    Advertisement
  3. How.com.vn English: Step 3 If you are...
    If you are holding the line in your left hand (you are right-handed) and the end is facing towards your body, this means that you will be coiling counter-clockwise. If the end is facing away from you, the coiling will be clockwise. The opposite will be true for left-handed coilers.
  4. How.com.vn English: Step 4 Run your coiling...
    Run your coiling hand (the dominant) along the line from your holding hand until you have both arms spread wide (an wingspan of rope).
  5. How.com.vn English: Step 5 Bring your dominant...
    Bring your dominant hand toward your holding hand and use your index finger and thumb to twist the line in the direction that you want the coil to go (usually a 180-360 degree twist does the trick).
  6. How.com.vn English: Step 6 Lay the rope into your holding hand and you should have the first of many neat, non-kinking coils.
  7. How.com.vn English: Step 7 Repeat 4-6 with the next arm lengths of rope until you reach the last arm length.
  8. How.com.vn English: Step 8 With this last length of line you can finish the coil in a variety of ways.
    One simple way is to take the last length of rope and wrap it three or four times around the outside of the coils that you made, then thread the end through the upper of the area between the coils and pull it tight, the coil should now be secured and you can use the extra length to tie the coil to something in order to store the line.
  9. How.com.vn English: Step 9 Done!
  10. How.com.vn English: Step 10 Finished.
  11. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • In step 5 above (rotating the cord using your fingertips while coiling) if during the coiling process the rotation of the cord is done in alternating directions (for example, rotating the cord with fingertips first counter-clockwise, then clockwise, then counter-clockwise, then clockwise, etc.) while coiling it, it allows a clean, organized, flat-lying coil to form and solves a host of problems, including preventing the figure eights above (**), doesn't matter how long the cord is or whether or not the end can twist (***), will coil the cord on one side of the coil which, when deploying the cord, allows it to quickly peel away from one side of the coil as opposed to (****)"Roadie" coils which easily knot up and twist when deployed, and yes, it also accommodates old, or stiff, seemingly twist-resistant cords such as coaxial cable.
      • At step 9 - if you make the last length of rope twice as long, then allow a short length of the free end to lay with the coil (and holding it there with your non-dominant hand) then bind the whole coil with the doubled rope before passing the loop through the coils, you end up with a loop to hang the finished coil from - useful if you intend to hang the coil on a hook.
      • What if the far end of the cord/rope is not free to ***twist? Maybe it's tied to something or just very very far away. Coil like the ****Roadies do, alternating left and right loops. Start just as before and every other loop lay on the opposite side of the growing coil. This will take some practice, as you have to shift your non-dominant hand's grip for the loops that are laid on the "back" side of the coil. Using this technique will allow you to neatly coil even the most stubbornly twist-resistant cords. Plus, there's no twist built up in the cord so that when you uncoil it, it won't tangle as easily.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 18 people, some anonymous, worked to edit and improve it over time. This article has been viewed 113,775 times.
      40 votes - 64%
      Co-authors: 18
      Updated: December 31, 2023
      Views: 113,775
      Categories: Tools
      Thanks to all authors for creating a page that has been read 113,775 times.

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement