How to Clean a Vacuum Thermosflask That Has Stains at the Bottom

Insulated flasks are all the rage these days, and for good reason. They’re affordable, easy to carry and keep your favorite beverages just the right temperature for hours and hours. Because of their construction, however, they can be difficult to clean after they’ve been used to hold coffee, tea and other liquids that can cause discoloration of the metal inside. The good news is that there are several quick and easy ways to rid your flask of unsightly stains, and most only require basic materials that you can find around the house.

Method 1

Method 1 of 3:

Using Baking Soda and Vinegar

Download Article

1
Put some baking soda and vinegar into the bottom of your flask. Pour about half a cup (120ml) of distilled white vinegar into your stained flask. Then, shake in approximately one tablespoon (15ml) of baking soda for every cup the flask holds. The vinegar and baking soda mixture will froth up, so be sure to put the flask in the sink when you combine them.^{[1]XResearch source}
- Baking soda and vinegar are excellent at killing germs and wearing down stains when acting together.^{[2]XResearch source}
- It’s important to use distilled white vinegar, as it's more acidic and will result in a better cleaning. It’s also less likely to leave a lingering odor or taste in your flask, which other types of vinegar may do.
2
Fill the flask with hot water. After the fizzing baking soda mixture has died down, fill the flask the rest of the way up with hot water. This will help loosen the dried stains from the inner surface of the flask, as well as distribute the vinegar and baking soda throughout. Leave the cap off the flask to keep the pressure from building up too much.^{[3]XResearch source}
- Baking soda and vinegar are notoriously reactive. Putting the cap on the flask with both substances inside could result in a messy leak or even damage.
Advertisement
3
Let the flask sit for a few minutes. Leave the flask to soak for 8-10 minutes. The baking soda solution will begin working on the worst of the discoloration while the heat of the water softens and collects the stain-causing residue. It’s as easy as that!^{[4]XResearch source}
- For especially thick buildup or heavy discoloration, give the vinegar and baking soda longer to set up.
4
Scrub the inside of the flask with a bottle brush. Purchase a bottle brush in the baby aisle of your local supermarket or department store. These brushes were designed to clean out the types of bottles used to feed infants, which tend to be tall and narrow, so they’ll work perfectly for scrubbing out your flask. Use the bottle brush to scour away any stubborn spots that the baking soda mixture hasn’t already removed.
- A basic bottle brush only costs about $5, but it’s a very useful tool to have on hand for difficult cleaning jobs.
- Be sure to run your bottle brush through the dishwasher after using it to clean a stained flask.
5
Pour out the mixture and rinse. Dump out the mixture so that the flask is completely empty. Rinse it repeatedly with hot water until no trace of vinegar or baking soda remains. Don’t forget to rinse around the opening of the flask. Your flask should now be clean and ready for use.^{[5]XResearch source}
- Pat the body, mouth and cap of the flask dry with a clean towel, or let it sit and air dry.
- Give the opening of the flask a sniff. If you can still smell vinegar, rinse it a few more times, or fill it with hot water and let it soak, until it’s odorless.

Method 2

Method 2 of 3:

Using Ice and Salt

Download Article

1
Fill your flask with ice. Empty out your flask if there is any liquid in it. Load the flask about a quarter of the way full with ice. It’s best if the ice is crushed or in smaller, irregularly shaped pieces, though normal cubes will also work. The exact amount of ice you use will depend on the size of your flask.^{[6]XResearch source}
- The type of bagged ice you can buy at the grocery store is perfect for this task.
- If you only have access to large, smooth or rounded ice cubes, you can break them up into a more effective size yourself by placing them in a plastic bag and crushing them or throwing them in a food processor.
2
Add a few spoonfuls of salt. Sprinkle 2-3 heaping spoonfuls of salt over the ice. For the purpose of cleaning, salt of a larger grain, such as coarse-ground kosher salt or sea salt, will get the most done. Add the salt to the flask quickly so that the ice you put inside doesn’t have a chance to melt.
- Use an extra half tablespoon (about 7ml) of salt if its a finer grain.
- Ice that melts in the flask may dissolve the salt, making it less useful for cleaning.
3
Close the lid and shake. Place the lid on the flask and make sure it’s secure. Shake the flask vigorously. As the hard ice and jagged salt granules move around inside the flask, they’ll scrape away whatever stains and grime have accumulate on the insulated metal. Shake for as long as you want, until you feel confident that the ice and salt have done their job.^{[7]XResearch source}
- The salt and ice combination will essentially act as an “exfoliant” for the walls of the flask.
- Don’t worry about damaging the metal that your flask is made of. They’re designed to withstand extreme temperatures, mild impacts from being dropped and general wear and tear.
4
Rinse out the flask. Take the lid off the flask and pour out the ice-salt mixture. Run some warm water into the flask and swirl it around to remove any lingering remnants. Rinse the mouth of the flask as well, and leave the lid off as it dries.^{[8]XResearch source}
- Using ice and salt to wear down stains is a safe, natural solution. Both ingredients are non-toxic and don’t contain chemicals that may be harmful if ingested.

Method 3

Method 3 of 3:

Using Denture Cleaning Tablets

Download Article

1
Buy a package of denture cleaning tablets. Run down to your local pharmacy and pick up a pack of dissolving denture cleaning tablets. Most denture tablets contain sodium bicarbonate (baking soda) as an active ingredient, which fizzes when the tablets are added to water. They are designed to eliminate stains from artificial teeth as they soak, which means they’re perfectly safe to use for objects that you’ll be putting in or around your mouth.
- A pack of denture tablets will only run you a few dollars, providing many uses in cleaning your well-used flask.
- The dissolving action of denture tablets also has an antibacterial effect, sterilizing the flask as they clean.^{[9]XResearch source}
2
Fill your flask with water. Fill your empty flask to about the halfway point with warm or hot water. The higher the temperature of the water, the faster it will begin to loosen the hold of troublesome stains. Allow the flask to soak for a few minutes before moving on to the next step.^{[10]XResearch source}
- Swish the water around inside the flask to make sure it’s completely wet throughout. This will help the sodium bicarbonate react on all parts of the flask’s inner surface.
3
Add one or two denture cleaning tablets. Drop a couple of denture tablets into your water-filled flask. The chemical reaction will cause the water to bubble and foam up, so it’s best to do this in the sink, outside or somewhere you don’t have to worry about making a mess. Don’t cap the flask—this will cause pressure to build up inside.^{[11]XResearch source}
- A good general guideline is to use one tablet for every two cups of the flask’s volume.
4
Let the flask sit for awhile. Walk away from the flask while the tablets do their thing. As they dissolve, the effervescent action will also disintegrate the buildup on the walls of the flask. Allow the flask to sit for up to half an hour, until the effect of the tablets has begun to diminish.^{[12]XResearch source}
- Denture cleaning tablets are one of the safest and most effective ways to clean a dirty flask or thermos. All you have to do is wait.
- Once the reaction has died down, you can go over the inside of the flask with a bottle brush for a more thorough clean.
5
Rinse repeatedly. Pour out the water that the denture tablets dissolved in. Run fresh water in and out of the flask a few times to clear away whatever traces are left behind. While the flask is drying, keep it right-side up with the cap off. Afterwards, it will look as good as new!^{[13]XResearch source}
- Putting the cap on your flask while it’s still wet will encourage bacteria to set up shop inside.

Expert Q&A

Search

Add New Question

Question
How do I remove oil and grease inside the bottle?
Alessandra Mendes
Cleaning Specialist
Alessandra Mendes is a Cleaning Specialist and the Founder of Cleaning Glow. With ten years of experience, Alessandra and her team specialize in providing residential cleaning services in the San Francisco Bay Area. All members of the Cleaning Glow team have completed thorough background checks.
Alessandra Mendes
Cleaning Specialist
Expert Answer
To remove oil and grease from a bottle, start by rinsing it with hot water. Next, add soap to the water and agitate it to create a soapy solution. This will help to loosen and dissolve the grease and oil. Use a bottle brush or a long-headed sponge to reach inside the bottle and scrub the surfaces thoroughly. Focus on areas with stubborn grease buildup, rubbing the walls or surface until clean. Rinse the bottle thoroughly with hot water to remove any soap residue and let it air dry. This method effectively removes oil and grease, leaving the bottle clean and ready for reuse.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0
Question
What are denture tablets, exactly?
Community Answer
Denture cleaning tablets are small, disc-shaped concentrations of effervescent substances typically used to soak stained and dirty dentures. They usually contain sodium bicarbonate, or baking soda, in addition to a few other ingredients that provide antimicrobial benefits. When added to water, they foam and fizz. This chemical process scrubs away stains on a microscopic level.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 10

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Clean your insulated flask every couple of weeks to make sure it stays sanitary enough for drinking.
Thanks
Helpful0 Not Helpful0
Empty out your flask when it’s not in use. This will allow it to dry and keep mold and bacteria from building up inside.
Thanks
Helpful0 Not Helpful0
Removable caps and lid-straws can usually be washed safely in a dishwasher.
Thanks
Helpful0 Not Helpful0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Avoid using sponges and similar implements to clean your flask. These are usually too large to work well, and more often than not will just end up getting trapped inside the narrow body of the flask.
Thanks
Helpful1 Not Helpful0
It’s generally not a good idea to clean your drinking container with harsh and potentially toxic chemical cleaners such as Lysol, bleach or OxiClean. Ingesting even a small amount of these chemicals could make you severely ill.
Thanks
Helpful1 Not Helpful0
Never microwave, freeze or apply direct heat to your insulated flask.
Thanks
Helpful0 Not Helpful0
Vacuum flasks and thermoses should never be put through the dishwasher. The intense heat can strip the flask’s materials of its insulating properties and damage the powder-based finish.
Thanks
Helpful0 Not Helpful0