The Best Way to Clean Concrete and Industrial Shop Floors

If your shop floor is looking a little dingy or stained, it might be time for a deep clean. Cleaning a shop floor is a little different from cleaning a floor in your home, and you might have to deal with tougher stains and marks. We’ve answered some of your most common questions so you can make your shop floor look as good as new.

Question 1 of 6:

What is the best cleaner for a concrete shop floor?

A mixture of laundry detergent and water is the most effective solution. Believe it or not, the soap you use to wash your clothes is perfect for washing concrete. It’s not too harsh, so it won’t stain your floors, and it smells good, too. Fill a bucket up with warm water and add a few capfuls of laundry detergent for the best (and cheapest) cleaning solution.^{[1]XResearch source}
- You can also add 1 cup (240 ml) of vinegar to the mixture for extra cleaning power, if you'd like.^{[2]XExpert SourceFilip Boksa
  House Cleaning ProfessionalExpert Interview. 20 August 2019.}
- Remember to always start by giving your shop floor a good sweeping before you mop.^{[3]XExpert SourceFilip Boksa
  House Cleaning ProfessionalExpert Interview. 20 August 2019.}
Advertisement

Question 2 of 6:

What’s the best way to clean stains on a concrete shop floor?

Sweep or vacuum the floor first to get rid of any large debris. Focus your soap mixture on any spots that are super stained. Start on one end of your shop and work your way across.^{[4]XResearch source}
Stay away from wire brushes, as they can scratch your concrete floor. Use a nylon scrubber brush to scrub any areas that are stained.^{[5]XResearch source}
Go over your shop floor one more time, this time with a bucket of clean water. Use a mop to make it easier, then open all the doors and windows to let your shop floor air dry.^{[6]XResearch source}
Advertisement

Question 3 of 6:

Can you clean a shop floor with vinegar?

If you notice rust marks on your shop floor, pour undiluted white vinegar all over the stain and let it sit for about 20 minutes. Use a bristle brush to scrub at the stain, the wipe the vinegar up with water.^{[7]XResearch source}

Question 4 of 6:

How do you remove mold/mildew from a concrete shop floor?

Fill up a bucket with warm water and add a few capfuls of mold-killing detergent (the bottle will say “works against mold” or something similar). Stir the mixture up until you see a few suds in your bucket.^{[8]XResearch source}
Pour your mold-killing mixture onto the shop floor, focusing on any areas that are moldy or mildewy. Let it sit for a few minutes to kill the mold before you start scrubbing.^{[9]XResearch source}
Go in small, circular motions to scrub the mold out of the floor. Spend a few minutes wiping down the stained area to get rid of mold or mildew, then pour clean water over the area. Wipe up the excess water with a mop and let the floor air dry.^{[10]XResearch source}
Advertisement

Question 5 of 6:

How do you remove oil marks from a concrete shop floor?

Grab a bag of clay or clumping cat litter and sprinkle it over the entire stain. Use a stiff broom or a nylon brush to work it into the concrete, but don’t wipe it up just yet.^{[11]XResearch source}
The longer you leave the litter on the stain, the better. Once the kitty litter has soaked up the oil, simply sweep it into the garbage with a stiff broom.^{[12]XResearch source}
If you still see some slight staining on your concrete, pick up a bottle of heavy duty degreaser from the hardware store. Pour it onto the stained area, then let it sit for about an hour. Use a nylon brush to scrub the degreaser away and remove the stain.^{[13]XResearch source}
Advertisement

Question 6 of 6:

How do you get rid of tough stains on a concrete shop floor?

Put on rubber gloves and goggles to protect your skin and eyes. Go carefully, and try not to splash your mixture too much. Stir the TSP into the water with a stick until it’s fully absorbed.^{[14]XResearch source}
The chemical will work to break up the stains in the concrete on your floor.^{[15]XResearch source}
Go in small, circular motions all over the stain to remove it. When you’re done, flush the floor with clean water and let it air dry.^{[16]XResearch source}
Advertisement

Expert Q&A

Search

Add New Question

Question
What can I use to clean my garage floor?
Filip Boksa
House Cleaning Professional
Filip Boksa is a House Cleaning Professional and the CEO and Founder of King of Maids, a company based in Chicago, Illinois. With over 10 years of professional experience, Filip and his team at King Maids specialize in providing home cleaning and organization services to their clients. They are dedicated to delivering high-quality and reliable service to ensure customer satisfaction.
Filip Boksa
House Cleaning Professional
Expert Answer
If you have one, use a blade mop, since it will hold less bacteria than a string mop.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Do a deep clean of your shop floor at least once a year to keep it in good shape.^{[17]XResearch source}
Thanks
Helpful1 Not Helpful0

Warnings

If you’re going to use a harsh cleaner like TSP, make sure you read the manufacturer’s label and follow all safety recommendations.^{[18]XResearch source}
Thanks
Helpful0 Not Helpful0