How to Clean a Recorder

The recorder is an instrument that has been around for centuries and is a popular first instrument due to its relative simplicity. Whether you own a plastic or wooden recorder, it’s important to clean the instrument regularly to prevent the airways from becoming blocked with dust and dirt, which will ruin the sound of the recorder. With some regular maintenance and the occasional deep-cleaning, your recorder will give you years of beautiful music!

Method 1

Method 1 of 2:

Soaking and Scrubbing a Plastic Recorder

Download Article

Always wash your hands with soap and warm water before you handle your recorder. This will help prevent dirt particles from building up inside of it.^{[1]XResearch source}
2
Remove the head joint of your plastic recorder. Twist and pull the head joint gently until it loosens. Pull it off of the body of the recorder so that you have two separate pieces to clean.^{[2]XResearch source}
- Plastic recorders can become blocked after some time because of the dirt that gets lodged inside as you play them. It’s important to maintain your recorder to keep it sounding nice.^{[3]XResearch source}
- Always wash your hands and brush your teeth before playing your recorder. This will limit the amount of dirt that gets inside, so you will have to clean it less often.
Advertisement
3
Mix 1 part dish detergent with 4 parts warm water in a container. Use mild dish detergent and a container large enough to fit the pieces of your recorder inside. The diluted detergent mixture with clean out the recorder as well as condition it to prevent dirt from building up as fast.^{[4]XResearch source}
- You should never soak a wooden recorder.
4
Soak the recorder in the container with diluted detergent for 15 minutes. Put the pieces of your plastic recorder gently into the water and detergent solution. Remove it after 15 minutes and place the pieces onto a clean dry towel.^{[5]XResearch source}
- If your recorder is not extremely dirty, you can soak it in one piece instead of taking it apart.^{[6]XResearch source}
5
Use a soft bottle brush to help clean away dirt inside the recorder. Push the bottle brush gently inside the bores of the pieces of your record and move it back and forth to remove any remaining dirt.^{[7]XResearch source}
- If you don’t have a bottle brush you can use a soft cloth wrapped around a thin rod or needle. Many recorders come with a metal or plastic rod for cleaning, or you can use a long sewing or knitting needle.
6
Rinse the recorder out with warm water, let it dry, and reassemble it. Rinse the pieces of the recorder out thoroughly over the sink then let the parts of your plastic recorder air dry completely on a clean towel. Twist the head joint gently back on to reattach it.^{[8]XResearch source}
- Dry the recorder more quickly with a clean cloth wrapped around the cleaning rod to dry the inside, and rub the outside dry with a clean towel.
7
Store the recorder in its case to protect it from dust and dirt. The case will also protect your recorder from damage. Never store it in areas with high humidity or heat.^{[9]XResearch source}
- Make sure the recorder is completely dry before you store it away in its case.

Method 2

Method 2 of 2:

Cleaning a Wooden Recorder and Drying with a Rod

Download Article

1
Wash your recorder with 1 part dish detergent and 4 parts water. Clean out your recorder with a diluted detergent solution when dirt builds up. Rinse it out immediately with plain warm water.
- Do not soak a wooden recorder as you would a plastic one.
2
Dry the recorder off with a clean cloth then let it completely air dry. Wipe the outside of the recorder completely dry, then push a lint-free cloth inside with a cleaning rod to dry the inside. Leave it to air dry on a clean towel before you put it back in its case.^{[10]XResearch source}
- Never let a wooden recorder stay wet for more than 15 minutes. If you let the recorder stay wet for too long you can damage the wood and finish.
3
Always store your recorder in its case after you play and clean it. Make sure it is completely dry and then place it back in its case. Always store the case in a low-humidity area and away from high-heat areas.^{[11]XResearch source}
- Don’t store the case in direct sunlight or near heat sources such as stoves. Try to store the case in a clean, dust-free area as well.
4
Dry the inside of your recorder with a lint-free cloth after each time you play. Use the plastic or metal rod that came with your recorder or a long needle to push the cloth gently inside the recorder. Leave the recorder to air dry completely after you do this.^{[12]XResearch source}
- Be careful not to jam the rod too hard against the block end with the mouthpiece of your recorder to avoid denting it.
- Don’t use a fuzzy swab of any kind because this will leave lint inside of your recorder.

Community Q&A

Search

Add New Question

Question
You said to put the recorder back in its case after cleaning. What if the case that you store it in is dirty?
Ruby
Top Answerer
If the case you store it in is dirty, it is time to clean it or buy a new one. In the meantime, you can wrap it in a pillowcase, or something else soft and keep it somewhere safe, preferably high up on a shelf (and not anywhere near a heat source or anywhere where it can be misplaced).
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 19

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Brush your teeth and wash your hands before you play the recorder.
Thanks
Helpful0 Not Helpful0
Don’t eat blue cheese or other moldy cheeses before you play your recorder, or you can spread mold spores inside of your recorder.
Thanks
Helpful0 Not Helpful0
Wooden recorders are harder to clean than plastic ones, so it is important to clean them after each use.
Thanks
Helpful0 Not Helpful0