Download ArticleDownload ArticleThis article was co-authored by Matt Ham. Matt Ham is a Computer Repair Specialist and the CEO and President of Computer Repair Doctor. With over a decade of experience, Matt specializes in Mac, PC, iPhone, iPad, and Smartphone repairs and upgrades. Matt holds a BS in Mechanical Engineering from North Carolina State University and an MS in Mechanical Engineering from Columbia University. Matt has expanded Computer Repair Doctor to seven different locations. He is also a Co-Owner of Repair Life, a full-scale marketing agency specializing in driving both online and offline leads to cell phone and computer repair shops and device retailers.
This article has been viewed 62,887 times.
Imagine this: one day, you get home from a long day and your phone battery is pretty much dead, you go to plug it in, and to your horror, nothing happens, your phone won't charge! If you want to be prepared in case something like this ever happens, or if you are actually experiencing this right now, then this How.com.vn can help. The good news is that the Micro-USB is probably only dirty instead of being completely broken. You can clean it.
Steps
Get a can of compressed air.
Raise the tube so that it's at a 90-degree angle with the can.Advertisement
Give the compressed air can a quick test spray to make sure that no liquid comes out.- Do not shake the can. This will put the contents under more pressure, which can liquefy the compressed air.
Aim the can of compressed air at the port. Direct the small tube at the micro/mini USB port on your smartphone/tablet.- Do not put the tube in the port. This gives any dust in the USB port a place to escape.
- Don't tip the can, this can cause liquid to come out of the tube.
Take a new or clean firm-bristled toothbrush.
Dip the toothbrush into a bottle of Isopropyl Alcohol.
Shake off any the excess alcohol off the brush as you do not want to put any excess liquid onto the usb port.[1]
Scrub the micro/mini USB port with the toothbrush.[2] It helps loosen any stubborn dirt or debris that did not come out by just spraying with compressed air.
Spray a can of compressed air on the USB port to expel any of the loosened debris or dirt from the USB port. This will also help dry the port before you attempt to check if this method works.
Take a clean firm-bristled toothbrush and spray some of the electrical contact cleaner onto it. Don't spray so much that the toothbrush is dripping with the cleaner.
Scrub the micro/mini USB port with the toothbrush.[3]
Dry the port thoroughly.- As the electrical contact cleaner is not quick evaporating as the alcohol, it is a good idea to spray with the compressed air as indicated but allow a little extra time for the port to dry before you connect it to your smartphone/tablet.
Expert Q&A
- QuestionHow do I clean my Mac charging port?
Matt HamMatt Ham is a Computer Repair Specialist and the CEO and President of Computer Repair Doctor. With over a decade of experience, Matt specializes in Mac, PC, iPhone, iPad, and Smartphone repairs and upgrades. Matt holds a BS in Mechanical Engineering from North Carolina State University and an MS in Mechanical Engineering from Columbia University. Matt has expanded Computer Repair Doctor to seven different locations. He is also a Co-Owner of Repair Life, a full-scale marketing agency specializing in driving both online and offline leads to cell phone and computer repair shops and device retailers.
Computer Repair SpecialistYou would definitely want to turn the machine off. If it's on a MacBook, those don't need cleaning that often. But you could just take a dry toothbrush and kind of brush it off. It's hard to disconnect the battery from a Mac so you don't want to use any kind of liquid that may damage the MacBook. If it often gets dirty, but it still functions 100%. So it's not usually something you have to worry about too much.
Tips
- Before you use this procedure, check with the company that you purchased the unit from and make sure that they will not repair the unit for you; free of charge. Check to see if the unit is still under warranty.Thanks
- Use a brush that is firm, but not too aggressive such as a steel brush. Try the toothbrush first, then try slightly stronger brushes with firmer materials. Don’t use anything stronger than brass or aluminum.Thanks
- Always allow a little time before you connect your tablet/smartphone to the power charger. This is just to make sure that the port is completely dry.Thanks
Warnings
- It is imperative that you check with the company you purchased your unit from, or the manufacturer of the unit first. If your unit is still under warranty, these steps may invalidate the warranty you have.Thanks
- When using compressed air or electrical contact cleaner, never shake the can. This pressurizes the contents even more so and can potentially be dangerous.Thanks
Things You'll Need
- Compressed Air
- Isopropyl Alcohol
- Electrical Contact Cleaner
- (Optional) Firm-Bristled Toothbrush
References
About This Article
Is this article up to date?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
