Download ArticleDownload Article

Rubber boots are great for keeping your feet dry in wet weather. They’re also the perfect footwear for outdoor work and farm activities. Cleaning the outside of your boots won’t take much effort and can usually be done with only a garden hose. After cleaning the outside, you may notice the inside needs to be cleaned as well, which can be done with a rag and soap or a white vinegar cleaning solution. When your boots are clean, maintain them with things like automotive tire protectant and sun shields.

Things You Should Know

  • You can hold rubber boots under a hose or faucet to rinse off mud or dirt.
  • Use a soft-bristled brush, magic eraser, or toothbrush to scrub scuffs away.
  • Load a clean rag with soapy water and push it inside of each boot to clean the interiors.
  • Cover the outside of your boots in tire protectant to keep them shiny, safe, and clean.
Part 1
Part 1 of 3:

Cleansing the Outside

Download Article
  1. How.com.vn English: Step 1 Wipe away light dirt and grime.
    If your boots aren’t especially dirty, you can usually clean them easily with a damp cloth. To prevent dirtiness from building up on your boots and causing longer cleaning times, do this after each time you use your boots.[1]
    • To increase the dirt fighting potential of your damp cloth, mix 1 tsp (5 ml) of dish soap with a ¼ gallon (1 L) of water. Douse your rag in this, and wipe down the boots.
    • Wipe your boots from the top to the bottom. This way, you’re less likely to cause dirt and grime to drip onto already cleaned parts of the boots.[2]
  2. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    Take your boots to a suitable area in your yard and spray them thoroughly with water from a hose. It may take some time before the dirtiness loosens and comes off. After most of the dirtiness has been removed, wipe away any that remains with a damp cloth.[3]
    • If you do not have a suitable place in your yard to do this, or if you do not have a yard, wash your boots in your bathtub or shower instead.
    • For mud that just doesn’t want to come off, combine 1 tsp (5 ml) of baking soda with ½ cup (237 ml) of warm water. Rub this onto the stubborn mud, wait 15 to 30 minutes, then rinse the solution and the mud free.[4]
    Advertisement
  3. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    Use caution when using a brush on your boots. Stiff bristle brushes, especially, can do damage to the boots or cause them to discolor. Use a soft bristle scrub brush to prevent damage. Avoid using a brush on the upper parts of the brush.
    • Use moderate to light pressure when scrubbing. Failing to do so can cause premature wear on the rubber.
    • Use an old toothbrush to get into the small grooves on the soles of your boots.[5]
    • A magic eraser can help remove stubborn grime from rubber soles.[6]
  4. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    Over time, your rubber boots may have become scuffed, creating unsightly discoloration. Apply some oil, like olive oil, to a soft cloth. Rub the cloth on the scuff marks in a circular fashion to erase these.
    • If the rag-oil technique didn’t work on your scuff marks, try a normal gum eraser, like the kind you use for pencils. Apply this gently to scuff marks to make them disappear.[7]
  5. How.com.vn English: Step 5 Air dry your boots.
    Air drying is the best way to dry rubber boots. Wipe away the moisture from cleaning them as best you can with a clean, dry rag. Then insert wads of newspaper into each boot. Wait a few hours, then remove the wet newspaper from the boots. If the boots are still wet, repeat this process.
    • Newspaper will not only absorb moisture in your boots, it will also help them keep their shape.[8]
  6. How.com.vn English: Step 6 Dry your boots quickly with a hair dryer, if necessary.
    If you need your boots for another excursion shortly after you’ve cleaned them, wipe away the water as best you can with a dry rag. Then aim a hair dryer set to “low” at the inside of each boot until they are dry.[9]
  7. Advertisement
Part 2
Part 2 of 3:

Refreshing the Inside

Download Article
  1. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    Combine 1 tsp (5 ml) of dishwashing liquid with about a ¼ of a gallon (1 L) of hot water in a bucket. Agitate this with your hand or a stirring utensil to distribute the soap throughout the water. [10]
  2. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    Douse a clean rag in your cleaning solution. Use this to thoroughly wipe the inside of each boot. Do this several times, rinsing your rag regularly in the solution throughout the process. After that, use a wet, clean rag to wipe away the soap.[11]
  3. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    Take a spray bottle and fill it half with white vinegar and half with water. Liberally spray this solution on the inside of the boot. The acid in the vinegar should kill the bacteria and organisms causing the bad odor.[12]
  4. Advertisement
Part 3
Part 3 of 3:

Maintaining Your Boots

Download Article
  1. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    You can protect the outer surface of your boots and add shine to them with an automotive tire protectant. These can be found at most general retailers, in the automotive section of big box stores, and at automotive stores.
    • Apply tire protectant to your boots every six months to achieve the best results.[13]
  2. How.com.vn English: Step 2 Shield your boots from light.
    Direct sunlight will cause the rubber of your boots to break down. When you’re not wearing your boots, store them in a paper bag to shield them from the light.
    • If you plan on drying your boots outside, do so in a place that doesn’t receive direct sunlight.[14]
  3. How.com.vn English: Watermark How.com.vn to Clean Rubber Boots
    In humid or hot weather, your boots may develop white marks or a similar film, which is often called “blooming.” This is caused by compounds in the rubber rising to the surface. This is completely natural and will not harm your boots. Remove this by using:
    • A rag with a few drops of olive oil to wipe down your boots. Use a circular motion while wiping, and the marks should disappear.
    • Specially designed rubber boot shining products or a boot buffer. These can be found at most general retailers and shoe stores.[15]
  4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Warnings

      • Never use shoe polish on rubber boots. Doing so may cause damage to your boots.
      Advertisement

      Things You’ll Need

      Cleansing the Outside

      • Baking soda (optional; for stubborn mud)
      • Bucket (optional)
      • Dish soap (optional)
      • Garden hose
      • Gum eraser (optional; for scuff marks)
      • Hair dryer (optional; for quick drying)
      • Olive oil (optional; for scuff marks and white marks)
      • Rags (clean)

      Refreshing the Inside

      • Bucket
      • Dish soap
      • Spray bottle
      • Water
      • White vinegar
      • Rags (clean)

      Maintaining Your Boots

      • Automotive tire protectant
      • Paper bags
      • Olive oil
      • Rubber boot polish (optional)

      About This Article

      How.com.vn English: Marc Sigal
      Co-authored by:
      Shoe Care Specialist
      This article was co-authored by Marc Sigal. Marc Sigal is a Shoe Care Specialist based in Los Angeles. Marc has over 19 years of experience working in the world of e-commerce, with extensive experience with the care of luxury goods. He is currently the VP of Strategic Partnerships at Blutag, an e-commerce platform helping consumers find products. Prior to Blutag, he founded ButlerBox, a dry cleaning and shoe care service based in Los Angeles, California. ButlerBox reinvented amenity services by placing custom-designed, wrinkle-resistant lockers in luxury apartment buildings, class A office buildings, shopping centers, and other convenient locations. The company got acquired by Rinse.com in 2021. Marc has a BA in Global and International Studies from the University of California, Santa Barbara. This article has been viewed 99,310 times.
      2 votes - 100%
      Co-authors: 5
      Updated: October 25, 2022
      Views: 99,310
      Thanks to all authors for creating a page that has been read 99,310 times.

      Reader Success Stories

      • How.com.vn English: W. R.

        W. R.

        Nov 10, 2017

        "The olive oil worked for shining my dull boots."
      Share your story

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement