How to Clean High Gutters

Leaves and other debris clogging your gutters can result in damage to your home’s woodwork. In the winter, trapped water will freeze and expand in gutters, possibly ruining them. Clean your gutters at least once a year unless you have overhanging trees, in which case you’ll need a twice-a-year cleaning.^{[1]XResearch source} To clean high gutters with a ladder, you’ll need to ensure the ladder is stable and then methodically clear the gutter by hand. To clean gutters from the safety of the ground, make a homemade gutter vacuum using a wet/dry vacuum, then pass the gutter vacuum over the gutter to remove debris.

Method 1

Method 1 of 4:

Prepping to Safely Clean High Gutters with a Ladder

Download Article

1
Put on work clothes and rubber gloves. Cleaning gutters can be dirty work. Additionally, gutters can be quite sharp. For these reasons, wear work clothes that you won’t mind getting stained and durable rubber gloves.
- Even in hot weather, wear a long sleeve shirt while cleaning. This will provide additional protection from insects and from the sharp edges of gutters.^{[2]XResearch source}
- When cleaning gutters on dry days, especially in dusty areas, wear eye protection and a face mask to prevent dust and pollen from aggravating your eyes and lungs.
2
Set up the ladder. Position the ladder where you plan to begin cleaning. Lean the ladder against the wall of your house, if possible. Otherwise, lean the ladder on the gutter where it is attached to the house with a fastener, like a nail. Be sure the ladder is at the correct angle, especially if you’re using an extension ladder.^{[3]XExpert SourceAllen Lee
Home Improvement SpecialistExpert Interview. 10 July 2020.}
- Put your toes against the feet of the ladder and extend your arms out straight. The ladder is in the proper position when your palms can comfortably reach the rungs.
- Before climbing your ladder, test it for stability by carefully climbing a step or two. If the ladder leans or wobbles, reposition it until it is sturdy.
- If the ground is soft, the ladder may dangerously sink. Place same-sized pieces of scrap wood under the feet of your ladder to prevent sinking, then test the ladder again for stability. Reposition the ladder as needed.
- Uneven or sloping ground may cause your ladder to lean.^{[4]XExpert SourceAllen Lee
  Home Improvement SpecialistExpert Interview. 10 July 2020.} Level out the ladder by putting pieces of scrap wood underneath the leg on the leaning side of the ladder. Test the ladder for stability and make any necessary adjustments.
Advertisement
3
Attach a bucket to your ladder for debris disposal. Straighten the body of a wire coat hanger but leave the hooked end as is. This should form a straight piece of metal ending in a hook. Bend the hook-opposite end around the handle of your bucket. Hang the bucket from the second rung from the top.
- Most of the debris in your gutters will be biodegradable. Should you desire to do so, debris can be thrown on the ground and left to decompose or composted.
- If more convenient, place a large garbage can, tarp, or wheelbarrow beside your ladder. Throw cleared debris in/on these receptacles.
- A plastic bag will work in a pinch as a substitute, but these can be awkward and dangerous to manage, especially if there is wind.

Method 2

Method 2 of 4:

Removing Debris from High Gutters with a Ladder

Download Article

1
Remove debris from the gutter by hand or with an air compressor. Scoop buildup and debris from your gutters with your gloved hand or blow it out using the nozzle on an air compressor. Alternatively, use a tool to clean the gutters, like a garden trowel, hand spade, or plastic spatula. Do not reach for debris. Only remove debris from areas comfortably within your reach.^{[5]XResearch source}
- For the safest gutter cleaning, have a friend or relative hold the ladder for you while you work to provide additional stability.
- Over reaching while on a ladder could compromise its stability and cause it to fall, potentially causing a serious injury.
When a section is clear of debris, descend the ladder and move it so you can reach the neighboring section of gutter. Clear the gutter as described. Continue repositioning and cleaning until your gutters are completely clean.^{[6]XResearch source}
3
Flush your gutters with water. Fasten a garden hose to a pole, tree trimmer, or a sturdy branch. Attach a nozzle, turn on the hose, and raise it to the gutter. In this fashion, flush the entire gutter to finish your cleaning. Note downspouts that flow unevenly or weakly; these may still have blockages.^{[7]XResearch source}
- If you suspect a downspout blockage, set up your ladder beside the spout. Tap along its length with a screwdriver from the top down. A dull thudding sound usually indicates a blockage.
- Downspouts can also be unfastened from the house and gutter. Lay the spout on the ground and clear blockages with a long stick, leaf blower, or pressure washer.^{[8]XResearch source}

Method 3

Method 3 of 4:

Making a Homemade Gutter Vacuum

Download Article

1
Equip your vacuum with a rigid extension attachment. Only use vacuums that can handle wet and dry materials, like a chipper vacuum or a wet/dry shop vacuum. Position the vacuum where you plan to start cleaning your gutters. Insert the longest hose into the vacuum and fasten the longest rigid extension attachment to the hose.
- The power cord for your vacuum may not be long enough to reach a power outlet. Use an extension cord to supply your vacuum with power in these cases.
- Choose a vacuum that has a strong motor for this project. Vacuums with weak suction will not be as effective.^{[9]XResearch source}
2
Calculate the measurement of the secondary extension. Measure the total length of the rigid extension attachment. When measuring gutter height, measure from the top of the gutter to about knee height. Subtract the attachment length from the gutter height. This measurement is the total length of your secondary extension.
- While using the gutter vacuum, you’ll likely hold the attachment at about chest height. Measuring the gutter from its top to the ground will likely result in a gutter vacuum that is longer than necessary, making it more unwieldy.
3
Cut a rigid plastic tube or pipe with a hack saw. Mark the secondary extension measurement (gutter height – attachment length) on the rigid plastic tube or pipe. Use a hacksaw to cut the plastic to secondary extension length. Excess tube/pipe can be reused or thrown away.
- Cutting your tube/pipe may have left behind burrs. These can cause slivers or cuts. Remove burrs with a file when necessary.
4
Assemble the gutter vacuum.^{[10]XResearch source} Slide the end of the extension attachment into the secondary extension. Join these pieces together firmly with aluminum tape. Do the same at the opposite end of the secondary extension with a duct elbow. When the first elbow is in place, similarly add the second elbow to it.
- Putting these pieces together will result in a long, straight, rigid extension that ends in a hook. The hook formed by the elbows should curve so it is facing roughly downwards.
- So the tool fits inside the gutter, use a nozzle or flatten the end piece.
- Be sure to tape the connections of your homemade gutter vacuum thoroughly. Gaps may cause suction to decrease, making the vacuum less effective.

Method 4

Method 4 of 4:

Using a Homemade Gutter Vacuum

Download Article

1
Clean the gutters. Hold your gutter vacuum at roughly the base of the extension attachment. Switch on your vacuum. Pass the downward-facing end of the hook slowly over the gutter to remove leaves, twigs, and other debris.^{[11]XResearch source}
- If your gutters are especially clogged, you may need to empty your vacuum while cleaning. Overly full vacuums may have decreased suction and leave behind gutter buildup.
2
Inspect the gutters for missed debris. Although most of the buildup will likely be gone after vacuuming, stubborn blockages may remain. Lean a suitable ladder against your home and climb it to visually inspect the gutters. Dismount the ladder, then target remaining clogs with your gutter vacuum.
- Some obstructions may still remain even after being targeted with your gutter vacuum. Use a tree trimmer, pole, or a sturdy stick to poke at and loosen these obstructions. Suck up loosened material with your vacuum.^{[12]XResearch source}
3
Remove small bits of remaining debris and check downspout flow. Tie a garden hose to a pole or long stick. Turn on the hose and lift it up to the gutter. Rinse the entire gutter with water to remove any small debris remaining. Poor water flow at the downspout may indicate a blockage in the spout.^{[13]XResearch source}
- Clogs can be removed from downspouts with a plumbing snake. Use the snake in the same fashion you would to remove a clogged drain.

Expert Q&A

Search

Add New Question

Question
Can I use an A-frame ladder to clean my gutters?
Allen Lee
Home Improvement Specialist
Allen Lee is a Home Improvement Specialist and the Owner of Honest Lee Handyman Services, a licensed and insured handyman business servicing Sacramento, California, and surrounding areas. Working with homeowners and businesses to get their small repairs done in a timely and efficient manner, Honest Lee Handyman Services provides gutter and dryer vent cleaning along with fixture, fence, drywall, and toilet repairs.
Allen Lee
Home Improvement Specialist
Expert Answer
If it's tall enough for you to easily reach the gutters, then yes! Just make sure it's fully extended and on level ground before climbing up.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

If you're worried about keeping your balance on a ladder, consider renting a scaffold or cherry-picker from a construction company instead.^{[14]XExpert SourceAllen Lee
Home Improvement SpecialistExpert Interview. 10 July 2020.}
Thanks
Helpful0 Not Helpful0
Rake debris off your roof so it doesn’t clog the gutters before cleaning them.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Gutters are often very sharp. To prevent cuts, always clean gutters in a long sleeve shirt while wearing sturdy rubber gloves.
Thanks
Helpful7 Not Helpful0
Beware of power lines above your home. Be sure you know where they are and avoid touching them with your body or with a ladder or other tools.
Thanks
Helpful3 Not Helpful1