How to Clean Gold Chains

Cleaning your jewelry regularly can preserve their appearance. To clean a gold chain, start by choosing which type of cleaning solution to use. Soak your chain in the solution. Then, gently scrub the chain with a toothbrush or soft cloth to remove any dirt or grime. Rinse off the chain with water and repeat as necessary. If you need additional assistance or if your chain is an antique, consult a jeweler.

Method 1

Method 1 of 3:

Doing a Routine Cleaning

Download Article

1
Place dishwashing liquid in a small bowl. Mix a few drops of mild dishwashing soap into a bowl with club soda or seltzer water. Make sure that the water is room temperature or warmer. If you are worried about spillage, place a towel under the bowel before setting it down.
- Club soda or seltzer water can help to remove stubborn spots on gold due to their carbonation.^{[1]XResearch source}
- You can also use dishwashing detergent. Just make sure that it is labeled as mild. Harsh detergent can ruin your jewel.^{[2]XResearch source}
2
Soak the chain. Take the chain and immerse it into the bowl. Take your time to avoid damaging the jewelry and to limit any spillage. Move the chain around so that it is not balled up or overlapping overly much. Leave the chain in the bowl for 2-15 minutes. Soak it again, if necessary, to remove particularly stubborn dirt or grime.
- You can also place your chain into a metal strainer and then lower the strainer into the bowl until it is submerged. Then, you can remove the chain by simply lifting the strainer. This is a good method to use if you are concerned about dropping the chain.^{[3]XResearch source}
Advertisement
3
Scrub with a toothbrush. Get out a soft bristled toothbrush. Pull your chain out of the bowl. Dip the toothbrush into the cleaning solution and gently stroke over the chain. Use quick, light strokes and make sure to never scrub heavily. To get in between the chain links, push some of the toothbrush tines into these spaces. Make a clockwise, circular motion and repeat anticlockwise. This ensures the dirt to loosen up or remove altogether.
- Going with a medium or hard bristled brush could make it easier for you to scratch your jewelry. It is also best to keep a brush set aside specifically for jewelry cleaning. This is at your own risk since it can spoil the jewel if it is delicate or sensitive.
When you are finished running your toothbrush over the chain, place your chain back into the strainer. Then, run some warm water over the chain and strainer. If you feel as if there is a chemical residue on the chain, you may want to move it a bit under the water.
Place your chain onto a cloth and gently pat it dry. Continue to do so until you can lift it up without feeling wetness or grease. Keep polishing in small motions until the shine is restored. Your jeweler can give you a polishing cloth to use or you can get a simple microfiber cloth.

Method 2

Method 2 of 3:

Removing Dirt and Grime

Download Article

1
Use rubbing alcohol. This method can be a bit abrasive, so it is not suggested for antique or fragile gold chains. Create a 50/50 mixture of rubbing alcohol and warm tap water in a bowl. Soak your jewelry for a few minutes. You do not need to rinse the chain again with this method, although you can if you prefer.^{[4]XResearch source}
- One good thing about using rubbing alcohol is that it will disinfect the chain while also cleaning it.
2
Use ammonia. In a small bowl, make a mixture of 6 parts warm tap water to 1 part ammonia. Leave your chain soaking in this mixture for a minute maximum. Ammonia is a very powerful cleaner, so you should only use it for newer, undamaged gold chains. You will also want to rinse the chain out thoroughly under water when you are finished.
- Using ammonia as a regular jewelry cleaner can break down the pieces over time. Therefore, it is best if this method is only used on occasion and for deep-set grime and residue.^{[5]XResearch source}
With this method you’ll need to pour a bit of beer onto a soft cloth. Place the chain within the cloth and rub up and down the links. You can also dip a soft toothbrush into beer and use it to lightly scrub the chain. You can use any beer with the exception of dark ale.^{[6]XResearch source}
This is a cheap, all-purpose approach to cleaning jewelry. Place a small dot of toothpaste onto a soft bristled toothbrush. Then, gently scrub at the chain until you start to see results. Reapply the toothpaste as needed. When you are finished, thoroughly rinse the chain off under warm water.^{[7]XResearch source}
You can also purchase a specialty gold cleaning solution from your jeweler directly or from a jewelry site online. Check the label to verify that it is okay for use on gold chains. Follow any additional instructions carefully, including any safety warnings.^{[8]XResearch source}
6
Use an ultrasonic cleaner. If you want professional results without messing with cleaning solutions, you can purchase an ultrasonic jewelry cleaner. You will place your gold chain inside the machine which will clean it through the use of small, fast vibrations. This is best used for sturdier, thicker chains without any embellishments.^{[9]XResearch source}
- Before you use an ultrasonic cleaner, it may be a good idea to talk with a jeweler to see if it is appropriate for your type of gold chain. Otherwise, it could result in damage to the chain.

Method 3

Method 3 of 3:

Avoiding or Managing Any Difficulties

Download Article

1
Make any repairs prior. In a brightly lit room, raise your chain to eye level and carefully inspect all of the links, the clasp, and any embellishments. If the clasp is already loose, then you may damage it beyond repair by cleaning it. If any gemstones are damaged, then they may fall off during the cleaning process.
- You can take your gold chain to a jeweler and ask them to repair the damage and give it a thorough cleaning as well.
If you are unsure about how your cleaning solution will affect your chain, then take a q-tip, dip it in a bit of solution, and apply it to one link. Observe to see if the link shows any discoloration as a result. If you see any discoloration or problems developing, rinse the chain out under warm water right away.
It is quite common to lose a piece of jewelry down a drain as a result of the cleaning process. Before you start to clean, block off the sink drain with a cover. Or, place a mesh strainer over the drain to ensure that your chain is safe to handle, even if dropped.^{[10]XResearch source}
4
Take care of any precious stones. If your gold chain includes gemstones, such as diamonds or pearls, you will want to carefully consider how a cleaning solution or process could impact them as well. Some solutions that are fine for gold alone, such as ammonia, could prove overly abrasive to an embellishment, like a freshwater pearl.
- Also, make sure to keep your scrubbing gentle. Or, you could accidentally snag and pull a gemstone out of its setting. Some gemstones can even lose color if scrubbed too hard.^{[11]XResearch source}
5
Consult with a jeweler. When in doubt, go to a jewelry store and talk with a professional jeweler. They can suggest cleaning methods and even offer advice regarding possible cleaning solutions. This is especially important if your gold chain is antique or especially delicate.
- If you bought your gold chain from a national jewelry chain, you might also be able to contact customer service for cleaning advice.

Video

Read Video Transcript

Expert Q&A

Search

Add New Question

Question
Do you have to clean gold jewelry?
Kennon Young
Master Gemologist Appraiser
Kennon Young is a Master Gemologist Appraiser and the Owner of Vermont Gemological Laboratory in Burlington, Vermont. With over 20 years of experience in the industry, Kennon and his team specialize in handmade engagement rings, wedding bands, and custom jewelry. He attended the Revere Academy of Jewelry Arts, the Gemological Institute of America, and the Rhode Island School of Design Extension. He is a Jewelers of America (JA) Certified Bench Jeweler Technician and received the highest credential in the jewelry appraisal industry, the ASA Master Gemologist Appraiser, in 2016.
Kennon Young
Master Gemologist Appraiser
Expert Answer
In some cases, it might not be a good idea to clean your gold jewelry at all. Gold only tarnishes after 50-60 years. If you have gold that's old enough to be tarnished, removing that tarnish will most likely devalue the gold, as the tarnish is showing the antiquity of the piece.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 2

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Cleaning your gold chain regularly will prevent the build-up of difficult dirt and grime.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Be aware that exposing your gold chains to household cleaning products, steam, or chlorine can cause damage that is not fixable with a cleaning.
Thanks
Helpful4 Not Helpful1