Download ArticleDownload Article

This How.com.vn teaches you how to charge a PlayStation 3 controller with the console-provided charger cable.

Part 1
Part 1 of 2:

Charging Your PS3 Controller

Download Article
  1. How.com.vn English: Step 1 Press your PlayStation 3's power switch.
    You'll find it on the right side of the PS3's front, though early PS3 models may have the power switch on the back of the console instead. Doing this will turn on your PS3.[1]
  2. How.com.vn English: Step 2 Locate your controller's charger cable.
    Your PS3 should have come with a USB cable to charge your controller; it has a large end, which is the USB plug, and a small end, which plugs into your PS3 controller.
    • If you don't have a PS3 charger cable, you can purchase a new one from Amazon.
    • Make sure you're using an original Sony charger and not a third-party charger, since non-Sony cables have been proven to be inconsistent.
    Advertisement
  3. How.com.vn English: Step 3 Plug the USB end of the charger into your PS3.
    It should slide into one of the narrow, rectangular slots on the front of your PS3.[2]
    • If the USB end isn't fitting into the PS3's port, rotate the USB end 180 degrees and try it again.
    • The piece of plastic inside of the USB cable needs to fit below the piece of plastic at the top of the USB slot on your PS3.
  4. How.com.vn English: Step 4 Plug the narrow end of the charger into your PS3 controller.
    There is a small slot on the front of the PS3 controller; this is where the cable plugs into.[3]
  5. How.com.vn English: Step 5 Press the controller's power button.
    It's a circular button with the PlayStation logo on it. You should see a red light appear on the front of your controller.
  6. How.com.vn English: Step 6 Wait for the controller's light to begin blinking.
    Once it does, your PlayStation 3 controller is charging.
    • Leave your controller on the charger cable for at least an hour before disconnecting it.[4]
  7. Advertisement
Part 2
Part 2 of 2:

Troubleshooting Your PS3 Controller

Download Article
  1. How.com.vn English: Step 1 Reset your PS3 controller.
    To do so, insert a pin or a paperclip into the small hole on the bottom of the controller, just below the L2 button.
  2. How.com.vn English: Step 2 Plug your controller into a different USB port on your PS3.
    If your controller isn’t charging, this will help determine whether or not the USB port is causing problems.
  3. How.com.vn English: Step 3 Plug your controller into a computer's USB port and turn it on.
    While you can't charge a PS3 controller on a computer, your controller will still light up if you press its power button while it is attached to a computer. If the controller doesn't light up, the problem is with the cable.
  4. How.com.vn English: Step 4 Use a different charger cable.
    In some cases, the problem may lie with a faulty or defective USB cord.
    • Third-party USB cables often don't work with PlayStation technology, so if you buy a new cable, make sure it's from Sony.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I don't see a red light on my controller. How do I know when it's done charging?
    How.com.vn English: Community Answer
    Community Answer
    If your PS3 Dual-Shock 3 is plugged in with the provided cord, you will know it is fully charged when there is no flashing of the red lights at all; there will either be a solid light or no light at all. If you're not seeing a light on, it's probably charged.
  • Question
    I lost my PS3 controller cable. How can I charge it?
    How.com.vn English: Community Answer
    Community Answer
    The PS3 controller is compatible with all mini USB cables. You need to buy a new mini USB cable in order to charge it.
  • Question
    Why did the buttons on my controller stop working after I restarted the controller?
    How.com.vn English: Community Answer
    Community Answer
    Did you re-sync your controller to your system? It's possible that the connection was lost.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • You can continue to play games and use the PS3 controller while it charges, but you will need to keep the controller plugged into the console via the USB cable to maintain a charge until the controller is fully charged.
      • To check the current battery level on your PS3 controller, press and hold down the PlayStation logo button on the controller for at least two seconds. The current battery charge level will display briefly on your television or computer screen.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • The PS3 controller will only charge if the PS3 console is powered on. If the controller is plugged into the console, but the console is powered off, your controller will not charge.


      Advertisement

      About This Article

      How.com.vn English: Jack Lloyd
      Written by:
      How.com.vn Technology Writer
      This article was co-authored by How.com.vn staff writer, Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for How.com.vn. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 518,453 times.
      147 votes - 74%
      Co-authors: 8
      Updated: June 29, 2023
      Views: 518,453
      Categories: PlayStation 3
      Article SummaryX

      To charge your PS3 controller, start by pressing the power switch on your PS3 console to turn it on. Then, plug the USB end of your charger cable into one of the USB slots on the front of your console, and the smaller end of the charger into the slot on the front of your controller. Next, press the controller’s power button, which has the PlayStation logo on it. At that point, you should see a red light on the front of your controller, which will start blinking when your controller starts charging. Let your controller charge for at least an hour before you unplug the charger cable. For tips on how to troubleshoot any problems you may have while charging your PS3 controller, read on!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 518,453 times.

      Reader Success Stories

      • How.com.vn English: Terry T.

        Terry T.

        Jan 3, 2019

        "I am 62 years old and just bought a refurb PS3. I've never played any games before, but How.com.vn has simple..." more
        Rated this article:
      Share your story

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement