Download ArticleStep-by-step instructions to keep your riding mower blades running at their best
Download ArticleX
This article was co-authored by Grant Wallace. Grant Wallace is a Landscaper and Owner of Grantlanta Lawn in Atlanta, Georgia. With over seven years of experience, he specializes in lawn maintenance and landscape installation. In 2012, he earned his BA from the University of West Georgia. Grant has been profiled in Shoutout Atlanta, Canvas Rebel, and Voyage ATL.
This article has been viewed 257,424 times.
Keeping the blades sharp and in good condition on a riding lawn mower will increase fuel efficiency, give better mowing results, and extend the life of this expensive piece of lawn maintenance equipment. Here are steps and tips on how to do this project yourself.
Steps
Download Article- 1Check the condition of your mower blades to see if they need changing. If the blades are not significantly worn but are dull, they may only require sharpening. If, on the other hand, the airfoil built into the back of the blade is worn away, or the blade is bent or otherwise damaged, you probably need to replace it.[1]
Park the mower on a suitable work surface. Turn it off and lock the brakes or chock the wheels. Disconnect spark plug(s).[2]Advertisement
Raise the mower deck to its highest setting to make it easier to access the blades.[3]
Raise the mower itself to allow room to get your tools underneath it. You need to make sure it is supported solidly, as riding lawn mowers are heavy, and you don't want to risk having it fall on you while you work on it. For greater safety, consider using a manufactured mower or tractor lift.[4]
Get the correct size wrench to fit the mandrel nut (or bolt) on your mower. You may also need a cheater pipe or other means of keeping the blade from turning while you remove the nut.- 6Turn the nut (or bolt) counterclockwise to remove it from the mandrel shaft, then allow the blade to drop off. For blades that are tightly seated, you may have to pry the blade off or work it up and down to loosen it after the nut is removed.
Take the old blade to a hardware store or mower repair shop to match it with the new blades you will install. Choose new blades to suit your own preferences – there are a number of different blades for each type mower, including enhanced discharging blades, mulching blades, and heavy duty blades.[5]
Compare blades at the store to make sure the offset, spline (if applicable), length, and other features match. Since there are many different brands and manufacturers of riding lawn mowers, making sure the blades you purchase fit your mower is critical for a successful project.
Install the new blades on your mower. Be sure to install the blade right side up, as they may fit upside down. Generally, if the blade has an offset in it, the center will be in a higher position than the ends of the blade. Make sure the blade fits all the way onto the spline to prevent damaging it when the nut that secures it is tightened.[6]
Tighten the nuts that secure the new blade. You may have torque specifications for this step for your individual mower.
Check the belts, pulleys, tensioners, and other parts of the mower deck assembly while you have the mower parked for servicing.
Lubricate the mandrel bearings and other parts equipped with grease fittings before lowering the mower.- 13Lower the mower off the blocks, and clean up/put away your tools.
Advertisement
Expert Q&A
Search
- QuestionHow do you know when your lawnmower needs a new blade?
Grant WallaceGrant Wallace is a Landscaper and Owner of Grantlanta Lawn in Atlanta, Georgia. With over seven years of experience, he specializes in lawn maintenance and landscape installation. In 2012, he earned his BA from the University of West Georgia. Grant has been profiled in Shoutout Atlanta, Canvas Rebel, and Voyage ATL.
LandscaperUnplug the spark plug from the lawn mower motor and gently run your finger along the blade. If it feels dull and rounded, it needs to be sharpened. - QuestionHow often should change blades on a mower?Grant WallaceGrant Wallace is a Landscaper and Owner of Grantlanta Lawn in Atlanta, Georgia. With over seven years of experience, he specializes in lawn maintenance and landscape installation. In 2012, he earned his BA from the University of West Georgia. Grant has been profiled in Shoutout Atlanta, Canvas Rebel, and Voyage ATL.
LandscaperIt depends on how often you use your mower—for instance, residential homeowners who only mow their grass a couple of times a month only need to sharpen their mower blades once or twice a year. - QuestionIf I have two blades and need to replace one but the other is fine, is it best practice to replace both?
Community AnswerIt is. As long as you are changing one, change them both for a smooth cut.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
SubmitAdvertisement
Video
Tips
- Sharp blades make mowing faster and more efficient, and extend the life of your equipment.Thanks
- Make sure that the spark plugs are not connected.Thanks
- Aftermarket blades are often much less expensive and of equal quality to original manufacturer's parts.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure blades are properly fitted on the mandrel so they do not slip or come loose.Thanks
- Block the mower up solidly so it will not fall while working underneath it.Thanks
- Mower blades have sharp edges, and with worn out blades, almost any edge can be sharp, not just the cutting edge.Thanks
Advertisement
Things You'll Need
- New blades
- Wrenches
- Block to support the mower
Expert Interview
Thanks for reading our article! If you'd like to learn more about changing the blades, check out our in-depth interview with Grant Wallace.
References
- ↑ https://www.thedailygardener.com/remove-riding-lawn-mower-blade
- ↑ https://www.thedailygardener.com/remove-riding-lawn-mower-blade
- ↑ https://www.jackssmallengines.com/diy/how-to-replace-the-blades-on-a-husqvarna-riding-mower/
- ↑ https://www.partselect.com/Dryer+test-thermostat+repair.htm
- ↑ https://www.thedailygardener.com/remove-riding-lawn-mower-blade
- ↑ https://www.cubcadet.com/equipment/cubcadet/knowledge-center/repairs/how-to-change-the-blade-on-your-cub-cadet-rider
About This Article
Landscaper
This article was co-authored by Grant Wallace. Grant Wallace is a Landscaper and Owner of Grantlanta Lawn in Atlanta, Georgia. With over seven years of experience, he specializes in lawn maintenance and landscape installation. In 2012, he earned his BA from the University of West Georgia. Grant has been profiled in Shoutout Atlanta, Canvas Rebel, and Voyage ATL. This article has been viewed 257,424 times.
Co-authors: 17
Updated: May 2, 2024
Views: 257,424
Categories: Featured Articles | Lawn Mowers
Thanks to all authors for creating a page that has been read 257,424 times.
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
Advertisement
