How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 93,687 times.
Learn more...
Repair and service shops may charge an expensive fee to change an ATV tire for you--often so much that you could have bought new ATV tires after just a few seasons. If you're reasonably good with tools, however, you can change your own ATV tires in your garage at home and save your money.
Steps
Drain all air from the ATV tires you want to change. You can do this quickly by removing the valve stems with a valve stem remover or slowly by depressing the nut inside the valve stem.
Break the seal between the tire and the wheel. This is a wire rim in your ATV tire that sits in a groove in the wheel. You can break this seal by pressing hard on the sidewall of the tire.[1]- In some models of ATV tire, you will find a tab you must flip to release the wire rim.
Wedge in the flat blade of your tire iron between the edge of the ATV tire and the rim of the wheel.
Wedge the second tire iron in about 8 inches (20.3 cm) along the rim from the first.
Slide the second tire iron around the rim of the wheel until it makes contact with the first.[2]- With some tires, this will be sufficient to fully remove the ATV tire. With others, you'll have to repeat with the opposite edge of the tire.
Set the new ATV tire on top of your wheel. Do this with the wheel lying on a wide, flat surface. The wheel won't be as stable as when you were removing the old tire.
Lever one section of the tire onto the wheel using your tire iron. Be careful not to cut or otherwise damage the new ATV tire.[3]
Slide the other tire iron in place and pass it around to set the tire on the wheel.[4]- This is essentially the same process as removing the old ATV tire, reversed.
- This step may be easier if you apply a thin layer of lubricant to the edge of the ATV tire.
Repeat with the opposite wall of the tire, if necessary. As with getting tires off, some models will require this step, while others will fall into place with just the first pass.
Fill the new ATV tires with air using an air compressor.[5]
Expert Q&A
Tips
Warnings
- Working with tires is hard on the the hands. Wear a pair of thick work gloves throughout this process in order to protect them.Thanks
Things You'll Need
- Valve stem remover
- 2 tire irons
- New or replacement tires for your ATV
- Mechanic's lubricant, water-based
- Air compressor
References
- ↑ https://boostatv.com/change-tire/
- ↑ https://www.youtube.com/watch?v=fJs7Vizv9ls
- ↑ https://www.fieldandstream.com/articles/gear/atvs/2012/08/how-mount-atv-tire/
- ↑ https://www.youtube.com/watch?v=7jrEhhy5INc
- ↑ https://www.fieldandstream.com/articles/gear/atvs/2012/08/how-mount-atv-tire/
- https://www.doityourself.com/stry/how-to-replace-atv-tires
About This Article
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
