How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 20 people, some anonymous, worked to edit and improve it over time.
There are 7 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 144,261 times.
Learn more...
Aluminum pipe is much easier to bend than aluminum tubing, due to the greater wall thickness, since it is less likely to collapse or deform when you bend it. The thicker material will also require more muscle or the use of a power bender.
Steps
- Use a manual pipe bender or a hydraulic bender if you have one. You can bend 1 1/4" aluminum conduit by hand, but a manual pipe bender will make it easier. It doesn't matter what you use to bend the pipe, the main thing is how you keep it from collapsing.[1]
- Fill the pipe with sand or other material, and secure three layers of window screening, with double hose clamps on the ends.[2]Advertisement
- Bend the pipe slowly so that you can watch to make sure it bends evenly and doesn't collapse or deform, and watch for cracks that may occur if the pipe is bent too sharply.[3]
- Use whatever means you have to bend the pipe. The pipe will not collapse, but remember that there is a radius to wall thickness / diameter formula that must be observed. A loose rule of thumb is a maximum 3 1/2" radius to 1" diameter ratio.[4]
- Consider building dies to bend your pipe if you have the equipment, you can machine your own bending dies for bending the pipe, or you can rent a manual or hydraulic bender for this purpose.[5]
Expert Q&A
Tips
- When you use an electricians conduit bender, the head of the bender supports the pipe and helps to prevent distortion while bending.[6]Thanks
Warnings
- Check the back set or distance from the beginning of the radius to the centerline of the bend to make sure the finished pipe is the right length.Thanks
- Aluminum pipe may crack if you are using an alloy that doesn't have sufficient give for that purpose.[7]Thanks
Things You'll Need
- Aluminum pipe
- Sand or other material to fill the pipe
- Conduit bender (optional)
References
- ↑ https://www.youtube.com/watch?v=w9GOBXdK11g
- ↑ https://www.youtube.com/watch?v=WPNN46B87mw
- ↑ https://www.youtube.com/watch?v=GEKE9AOdXO4
- ↑ http://www.metalgeek.com/archives/2005/05/01/000047.php
- ↑ https://www.youtube.com/watch?v=3n_lf2RHIPs
- ↑ http://pdf.lowes.com/howtoguides/783250740345_how.pdf
- ↑ https://timberridgedesigns.com/bending-aluminum-tubing-tips-tricks-and-diy-help/
About This Article
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.