How to Add Swing to a Cricket Ball

The basic idea of swing bowling is to get the cricket ball to swing sideways as it moves towards the batsman. The most important factors in achieving this are the amount of wear and tear on the ball, the speed at which it is bowled, and the bowler’s grip. A swing bowler can use a conventional swing, a reverse swing, or a contrast swing.

Method 1

Method 1 of 3:

Bowling with Conventional Swing

Download Article

Cricket balls swing best before they experience any wear and tear. It should have a prominent seam, and one side that is very shiny.
Grip it with your middle and index fingers on either side of the seam, with the ball resting on your thumb and third finger. The shiny side should be facing in the direction of the batsman.^{[1]XResearch source}
Advertisement
3
Release the ball with the seam pointing in the direction of the swing. A ball that swings from the leg side toward the off side is an inswing, and a ball that swings from the off side toward the leg side is an outswing.^{[2]XResearch source}^{[3]XResearch source}
- To bowl an inswing, release the ball with the seam pointed at about a 20 degree angle towards fine leg.^{[4]XResearch source}^{[5]XResearch source} The last point of contact with the ball should be your middle finger.^{[6]XResearch source}
- To bowl an outswing, release the ball with the seam pointed at about a 20 degree angle towards the slip fielders.^{[7]XResearch source}^{[8]XResearch source} The last point of contact with the ball should be your index finger.^{[9]XResearch source}
- A conventional swing will work best between 30 and 70 mph.

Method 2

Method 2 of 3:

Bowling with Reverse Swing

Download Article

A new ball will swing naturally in a conventional direction, but at about this age, wear on ball changes its aerodynamics. It begins to swing in opposite direction of seam, towards the shine.^{[10]XResearch source}
2
Keep the ball in good shape. Reverse swinging works best when the smooth side of the ball is very smooth, the rough side is very rough, and the seam is prominent.^{[11]XResearch source}
- Continually polish the smooth side of the ball during play. Keep in mind, however, that scratching the rough side constitutes tampering, and is illegal.
Grip it with your middle and index fingers on either side of the seam, with the ball resting on your thumb and third finger. The rough side should face the direction of the swing.^{[12]XResearch source}
4
Bowl as you would a conventional swing, but with the sides of the ball reversed. This means the shiny side will now be facing away from the batsman. The difference between a conventional swing and a reverse swing is that in the former, the ball swings in the direction of the seam, while in the latter it swings in the opposite direction.^{[13]XResearch source}
- To bowl an inswing, release the ball with the seam pointed at about a 20 degree angle towards the slip fielders.^{[14]XResearch source}^{[15]XResearch source} The last point of contact with the ball should be your middle finger.^{[16]XResearch source}
- To bowl an outswing, release the ball with the seam pointed at about a 20 degree angle towards fine leg.^{[17]XResearch source}^{[18]XResearch source}The last point of contact with the ball should be your index finger.^{[19]XResearch source}
- Bowl hard. The faster you are able to bowl, the more effectively you will be able to achieve a reverse swing. The speed necessary also depends on the state of the ball; the rougher the rough side of the ball is, the less speed you will need.

Method 3

Method 3 of 3:

Bowling with Contrast Swing

Download Article

As with conventional and reverse swings, one side should be distinctly shiny, and the other side distinctly rough. Keep the ball as dry as possible.^{[20]XResearch source}
Grip it with your middle and index fingers on either side of the seam, with the ball resting on your thumb and third finger.
3
Bowl with the seam pointing straight down the pitch. The direction of the swing will be determined by the speed at which you throw.
- At a low speed (under 70mph), the ball will swing toward the rough side.^{[21]XResearch source}
- At a high speed (over 70mph), the ball will swing toward the smooth side.^{[22]XResearch source}
- Note that the exact speed that determines the direction of the swing will vary based on the amount of wear on the ball.^{[23]XResearch source}

Community Q&A

Search

Add New Question

Question
Where can I find a video that shows the wrist and the grip during the swing?
Community Answer
Try YouTube. Look for a master class by someone great at swing bowling such as James Anderson or Wasim Akram.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 28 Helpful 96
Question
How can I improve my batting?
Community Answer
Practice everyday. Focus on the ball and play the shot in the direction where balls come.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 51 Helpful 138
Question
I am trying to swing the ball but I cannot. Is it my problem, or the ball's?
Community Answer
A conventional swing should be done with a new ball, a reverse swing should be done with an old ball, and in a conventional swing you can use any of them.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 49 Helpful 120